Black 4" Cambered Bar

If your bench and chest need more work, and you are weak pressing off your chest, the Black Cambered Bar belongs in your rotation.

A cambered bar lowers the load compared to a standard bar path. That means more range of motion and more time under tension in the bottom. It’s a simple way to build power off the chest, hammer the triceps, and clean up control in the hardest part of the press.

This bar is made to handle real training. With A3 steel, hard-black finish on the shaft and sleeves, and a mix of 2 bushings and needle bearings, it loads smoothly and stays solid session after session.

Put your Trust in the build, keep your Focus on position, and stack Strength over time. Live, Learn, Pass On.

Why you’ll use it

• More range of motion than a straight bar to build strength off the chest
  
• Helps reinforce control, tightness, and a repeatable pressing groove
• Strong choice for max effort work, volume work, and supplemental pressing
• Great for Rows, Extensions, JM Presses, Overhead Presses, and more.

Specs

• Material: A3 Steel
• Shaft finish: Hard Black
• Sleeve finish: Hard Black
• Shaft Diameter: 1.2 inches
• Sleeve rotation: 2 bushings + needle bearings
• Max load: 1000 lb
• Bar length: 2200mm (86.614")
• Sleeve length: 415mm (16.338")
• Flange width: 30mm (1.181")
• Knurling length: 200mm (7.874")
• Knurling depth: 0.5mm (0.19")
• Bar Weight: 44lbs. +/- 1
• Camber: 101.5mm (4")
  
• Camber Width: 18" - 24"