Omnipure Fluoride Removal Cartridge - Your Solution for Clean Water

Omnipure Fluoride Removal Cartridge 10" x 2.5″

Suits:

Aquarius Triple Bench Fluoride Alkaline Aragon
https://alkalineworld.com.au/collections/kitchen/products/aquarius-triple-bench-fluoride-alkaline-aragon

And

Aquarius Under sink Triple Stage System
https://alkalineworld.com.au/collections/kitchen/products/aquarius-under-sink-triple-stage-system

The Omnipure Fluoride Removal cartridge is your solution for clean, safe drinking water. This high-performance filter effectively removes 97% of fluoride from your water supply, providing you with fresh, pure water for drinking and cooking.

Specifications:

• Flow Rate: 10 litres per min
• Filter life: 1,800 litres or 12 months
• Size: 2.5″ x 9″ or 2.5″ x 10″, suitable for most standard size housings
• Micron: 5 micron*
• Manufactured in USA by Omnipure

Extended Cartridge Life

In addition to its exceptional filtration capabilities, this cartridge is designed to maximize the time between replacements. By effectively removing impurities, it extends its lifespan, ensuring consistent water quality for longer periods.

NSF Certified and Standard Compatibility

Tested and certified by NSF International against NSF/ANSI Standard 42 for material requirements, this filter cartridge meets the highest quality standards. Its standard 10″ size ensures compatibility with most under-counter and countertop filter systems, making it a convenient choice for your home or office.

Pleated Design for Low-Pressure Applications

Featuring a pleated design, this cartridge is particularly well-suited for low-pressure applications, such as residential water supplies. This design allows for efficient filtration while maintaining adequate water flow.

Ease of Installation and Replacement

Omnipure’s commitment to user-friendly products extends to this filter cartridge. Installation is straightforward, and replacement is quick and sanitary, ensuring a hassle-free experience when it’s time for a new cartridge.

Please Note: when changing the fluoride cartridge it is important that the fluoride cartridge is flushed alone to prevent it from flushing into the next stages of filtration.  Flush water through this cartridge in the system for 20 minutes before adding the next stages.

How to Install and Flush the Fluoride Removal Replacement Cartridge

Follow these essential steps to ensure optimal performance and the best-tasting filtered water:

1. Unpack the Cartridge – Carefully remove the new fluoride removal replacement cartridge from its packaging.
2. Prepare for Installation – Connect the cartridge to your water filter system, but do not turn on the water yet.
3. Remove Downstream Cartridges – Take out all filtration cartridges that come after the fluoride removal cartridge (typically positioned in slot 1 or 2). Handle ceramic cartridges with extra care, as they are delicate.
4. Install the Fluoride Cartridge – Securely place only the fluoride removal cartridge into the system.
5. Initial Flush – Turn on the water supply and check for leaks. Flush the system for 20 minutes with only the fluoride removal cartridge installed. If desired, the flushed water can be collected for watering plants.
6. Release Pressure – Turn off the water supply and open the faucet to release pressure and drain the system.
7. Reinstall Remaining Cartridges – Carefully place the other filtration cartridges back into their original positions.
8. Secure and Check for Leaks – Tighten all filter housings and turn the water supply back on. Inspect for any leaks.
9. Final Flushing – Flush the entire system for 10 minutes.
10. Post-Installation Flush – After 12 hours, flush the system again for 3 minutes.

Your water filter system is now ready for use!

What is the Omnipure Fluoride Removal Cartridge?

The Omnipure Fluoride Removal Cartridge is designed specifically to reduce fluoride levels in drinking water. This 10" x 2.5" filter utilizes a unique filtration media that effectively traps fluoride ions, ensuring that you have access to cleaner and safer water. Because fluoride is commonly found in municipal water supplies, using this cartridge can significantly improve the taste and quality of your water.

Why Choose the Omnipure Cartridge for Your Water System?

Choosing the Omnipure Fluoride Removal Cartridge means you are investing in a filter that employs advanced technology for maximum performance. Unlike generic filters, this cartridge is built to work effectively with reverse osmosis systems and other water filtration setups. Therefore, it not only removes fluoride but also enhances the overall water quality, making it an essential component for households looking to improve their drinking water.

Easy Installation and Maintenance

The Omnipure Fluoride Removal Cartridge is designed for easy installation, so you won't need professional help to set it up. It fits into standard filtration systems, making it a versatile choice for many home setups. However, regular maintenance is important for optimal performance. Replacing the cartridge every six months ensures that fluoride and other contaminants are effectively removed from your water supply. This combination of simplicity and efficiency makes Omnipure a top choice for families seeking healthier water options.