The V-Pro Series, eliminates Dimmer Buzz For GLS Bulbs, GU10 Lamps, and LV Transformers Including Trailing Edge Loads. It is equipped with Self Re-setting Overload Protection to handle overload situations, for example if the wattage of the bulbs/lamps are too high on a circuit. The dimmer also contains a heat sensor which again stops damage to the dimmer if it becomes too hot.

The V-Pro Series Dimmer has Soft Start Technology which allows a longer life span of the bulbs or lamps by gradually increasing the brightness level.

The V-Pro Series were primarily designed for Dimmable LEDs.
The dimmers, with a minimum load of only 10 Watts can operate 1-10 good quality dimmable LEDs (per dimmer module).

These Dimmers can also be used to operate upto 12 Varilight (YCA20D) or Megaman Dimmable Energy Saving Lamps, (Please refer to the instruction leaflet of the Megaman lamps for usage tips).

The V-Pro Series Dimmers can also be used for Mains Voltage Lighting, Trailing Edge Loads, and Electronic Low Voltage Transformers. When using Electronic Low Voltage transformers we recommend that a maximum of 5 good quality dimmable electronic transformers are used (10 if Varilight) with this Dimmer range. Please note: add the watts of the bulbs/lamps if using Varilight Transformers, to determine which dimmer to select, but if using another manufacturer of transformer, add up the VA of the transformers so it does not exceed the maximum of the dimmer.

The V-Pro Series Dimmers can also be used for mains incandescent GLS lamps (standard mains light bulbs), GU10 Lamps or similar Hi Spot Mains Halogen lamps, (only use quality UK supplied lamps), up to the maximum load as specified on the dimmer.



The V-Pro Series Dimmer can NOT be used for wire-wound Low Voltage transformers, Fans or inductive loads. _Dimmable LED load 10w-120w (per dimmer) _Suitable for 1-10 good quality LED lamps per dimmer module _For Incandescent bulbs, mains, eco and L/V halogen bulbs please click on the link in the product description below. _V-Pro dimmers are suitable for dimmable LEDs, dimmable ESLs, electronic transformers, trailing edge, standard bulbs, GU10 and mains halogen _Fits a 25 mm wall box