The MIRA Safety Gas Mask Replacement Parts Kit contains every critical wear component needed to restore a MIRA Safety respirator to full working condition. Available in two configurations — the Essentials Kit and the Deluxe Kit — this kit is compatible with the CM-6M (all variants), CM-7M, CM-8M, and TAPR gas masks. Wear parts require replacement at minimum every five years for masks held in storage, and more frequently for masks in active tactical use.

Who this is for

• Preparedness-focused owners: anyone storing a MIRA Safety mask long-term who wants to maintain full protective capability at scheduled service intervals
• Tactical users: first responders, law enforcement, and military personnel whose masks see regular deployment and need more frequent component replacement
• New mask owners: anyone who has acquired a CM-6M, CM-7M, CM-8M, or TAPR secondhand and needs a full reset of all elastomeric wear parts before first use

Compatibility with parent mask

This kit is designed specifically for the MIRA Safety CM-6M (all variants), CM-7M, CM-8M, and TAPR. Inner mask valves are included in all kits, but are not required for the CM-7M, CM-8M, or TAPR — only the CM-6M uses the oro-nasal cup inner valves. These parts are not compatible with any smaller gas masks designed for children. For the Deluxe Kit, the head harness design differs between the CM-6M and the CM-7M, so select the correct variant for your mask model at checkout.

What each part does

Every component in this kit performs a specific protective function. Replacing them on schedule keeps your mask airtight and performing as designed.

Essentials Kit contents

Deluxe Kit contents

The Deluxe Kit includes all four components above plus one replacement head harness. The head harness should be replaced every 10 years, or sooner if the elastic shows stretching or visible damage. Because the harness geometry differs between the CM-6M and the CM-7M, the Deluxe Kit is sold in model-specific variants — confirm your mask model before ordering.

Replacement intervals

Elastomeric and rubber components degrade over time even without use. For masks in storage, all wear parts should be replaced at minimum every five years. Masks in active tactical use require more frequent inspection and earlier replacement. The head harness has a longer service life and should be replaced at the 10-year mark or whenever elastic integrity is compromised.

Installation and fit testing

Installation is straightforward, but having the parts installed by a professional respirator service center is the recommended approach. Professional service centers use a negative pressure fit tester to confirm no leaks remain after new components are seated. If you install the parts yourself, perform a negative pressure test before returning the mask to service to verify the seal is intact. MIRA Safety and its affiliates are not responsible for incorrect assembly, improper maintenance, or mask modifications.

Specifications

Frequently asked questions

What masks does this kit work with?

This kit is compatible with the MIRA Safety CM-6M (all variants), CM-7M, CM-8M, and TAPR. It is not compatible with any MIRA Safety masks sized for children. If you own a CM-7M, CM-8M, or TAPR, note that the included inner mask valves are not required for those models.

Do I need the Essentials Kit or the Deluxe Kit?

It depends on how old your head harness is. If the harness is under 10 years old and the elastic shows no damage, the Essentials Kit covers every other critical wear part. If the harness is near or past the 10-year mark, or if the elastic is stretched or degraded, choose the Deluxe Kit. Select the Deluxe Kit variant that matches your specific mask model — CM-6M and CM-7M use different harness designs.

Can I install these parts myself?

Yes, but a professional respirator service center is the recommended approach. Service centers use a negative pressure fit tester to verify the seal after installation. If you install the parts yourself, perform a negative pressure test before putting the mask back into service. Improper assembly can compromise the mask's protective seal.

How often should I replace gas mask wear parts?

At minimum every five years for a mask in storage. Masks used in active tactical or operational settings need inspection and replacement on a more frequent schedule. The head harness has a longer service life and should be replaced every 10 years or sooner if elastic degradation is visible.

What does the 40 mm plug do?

MIRA Safety gas masks have two filter ports. The 40 mm plug blocks one port so you can run a single filter, reducing weight and improving mobility — particularly useful when shouldering a rifle. The plug does not affect the mask's protective performance when a single properly sealed filter is installed in the open port.

Can I get assistance choosing the right kit configuration?

Yes. If you are unsure which kit variant matches your mask or whether you need the Essentials or Deluxe configuration, contact us and we will confirm the correct selection before you order.