AIRTEC MOTORSPORT ENGINE OIL BREATHER SYSTEM FOR FORD FIEST MK4/5/6 ST150 2.0 ltr Duratec

The first off the shelf Oil breather system for ST150 2.0 ltr Duratec

Stops oil blowing out of top of cam cover and crank case breather

Available in Polished Alloy or Pro-Series Black

AIRTEC part no: ATMSFO58

AS Performance brings you this great addition to your ST150, After taking our own Supercharged ST to 300+bhp we noticed on fast road and track use we was seeing oil coming from the crank case breather, we have also seen this in re-mapped normally aspirated ST's as well.

Commonly known as an Oil breather, this neat kit actually separates the oil were it would cause excess smoke from getting thrown into the inlet manifold from the crank case breather, for the highest of tuned ST's we have added an oil level indicator if the oil fills up to 300ml, this can be easily drained off by removing the drain located at the bottom of the tank.

The kit includes everything you need to fit

1 x AS Performance oil breather tank with oil level indicator

2 x Fluoro oil resistant custom shaped Pro-Hose available in 3 colours

Genuine ford inlet manifold rubber blank off pipe, you blank off inlet manifold as you will not need the crank case to breathe back into the inlet manifold anymore, this is the main cause of poor breathing of engine.

25mm Stainless mesh filter

All stainless jubilee clips and fixing included

Full fitting instructions, takes about 20-30mintutes, it's very easy to fit

Please note - some items may incur extra shipping charges that have to be sent by courier and are too large / expensive to be sent by Royal Mail (for example headlamps, headunits, speakers, lowering springs etc) to the following postcode areas, Channel Islands, BT, most IV, HS, KA-27-28, KW-15-17, AB30-38, AB44-56, FK17-99, G83, KW1-14, PA21-40, PH18-26, PH30-41, PH49-50, all ZE, IM, and any other non mainland postcodes. Please also note that delivery times are normally 2-3 working days for these postcode regions.