MINI LED INDICATOR

IND-0008

Description:

Mini LED motorcycle indicators by Oberon Performance. Bi-directional LED CAD/CAM designed to increase safety and to alleviate most of the current LED aftermarket indicators issues. Benefits include:

Improved motorcycle safety

Highly visible

Extra wide angle viewing pattern

LED flash visible from front and rear of indicator body (double sided)

Instant illumination and no fade

Small current draw

Billet aluminium housing

High power amber LEDs

Elegant design

Stainless steel fasteners

12 Volt

The indicator uses eight high powered wide angled LEDs either each side of the circuit board. Each indicator is visible from both the front and the back of the unit with equal luminosity. This has a substantial improvement on the visibility of the indicators and greatly adds to the safety of the motorcycle and rider. Due to their low draw rate and very nature, LEDs offer a much longer life than ordinary filament indicator bulbs.

LEDs do not have a time delay on operation so they are instantly on at full power and off with no fade. Again this gives a distinct and noticeable flash or presence to other road users making it much less likely for the indicator to ignored or overlooked. One of the most common complaints we have observed at Oberon Performance is of the many motorcycle indicators that have low quality lenses. Our unique lens fully envelopes the LED circuit board completely with a 360 degree solid wall providing a melt proof, shake proof and loss proof cover. These indicators are CNC machined from billet aluminium and are available in black or silver anodise. Complete with stainless steel fasteners, sleeved cable (350mm long) and an M8 threaded fitting to allow front or rear universal fitting to the motorcycle.

Indicator body size: 68mm long x 27.5mm dia x 20mm width. A 15mm spanner flat is present to aid tightening when fitting to your motorcycle.

PLEASE NOTE: some motorcycles are fitted with Bulb type Indicators, EVEN some modern bikes. Please confirm this as you may need Resistors (available on our menu) to control the flash rate - if you have any doubt then please ask for advice. Because of the high power and heat that is produced by these LEDs they need to remain cool during operation, please do not wire them to be permanently on as running lights, for example.

Weight (Each): 56g

Alloy: aluminium 6000 series

Pack Quantity: 1

Available Blade Colours: Black / Silver

Dimension: Ø 27.5mm

Dimension: 20mm wide

Dimension: 68mm long

Fasteners: Stainless Steel

Pack Quantity: Pair

Voltage: 12v

Weight: 112g(pair)

This is a customizable item. before we can send it out we need know you choice. Your items will be delayed if you do not let us know. please message us or put it in order notes.

Below are the options.

Cap Colour

Black, Silver

this items fits stock vehicle. need basic mechanical skills to fit. 

This item is made to order and can take up too 10 - 15 working days if out of stock. 

We're a genuine UK based company with over 30 years experience and full back up technical knowledge Your sale is important to us whether you purchase a multi-media system or a tax disc holder you can be assured of our 100% commitment If you do not see what you are looking for please ask as we are adding new items every day Please note - some items may incur extra shipping charges that have to be sent by courier and are too large / expensive to be sent by Royal Mail (for example headlamps, headunits, speakers, lowering springs etc) to the following postcode areas, Channel Islands, BT, most IV, HS, KA-27-28, KW-15-17, AB30-38, AB44-56, FK17-99, G83, KW1-14, PA21-40, PH18-26, PH30-41, PH49-50, all ZE, IM, and any other non mainland postcodes. Please also note that delivery times are normally 2-3 working days for these postcode regions Please note - For items that have to be sent by courier in Europe there maybe an extra charge for some countries such as NORWAY, ICELAND, MALTA & CYPRUS