Cappuccino Fusions Stain and Finishing Oil penetrates the wood to condition, stain and protect against water, stains and abrasion.  It can be used on new or stripped wood surfaces.  It can also be used over Fusion Mineral Paint.

How To Use

• Stir - DO NOT shake before application.
• Sand the wood evenly with 100-120 grit sandpaper.
• Remove dust with a vacuum or lint free rag.
• Apply evenly using a brush or applicator pad.
• On raw wood, remove excess after 15-20 minutes.
• On Fusion surfaces remove excess immediately.
• Recoat after 9 hours.
• More coats increase durability, opacity and sheen.
• Dry touch after approximately 9 hours.
• Ready for normal use after approximately 3 days.
• Cure time is 10 days, after which the surface can be cleaned with soap and water.

Coverage

237ml container covers 3-6 m2 depending on wood density.

Spills and tools to be cleaned using mineral spirits.