The 6 pack rack unit for RF distribution and housing Lectro, WisyCom or Audio Ltd dual channel slot receivers.

The PSC RF Multi SR Six Pack contains two separate, active 1 x 4 RF splitters for use with up to three slot style receivers. This compact, rugged device was developed using the latest super low noise RF amplifiers.

Its two inputs are traditional BNC connectors for ease of use in interfacing with your external antennas. Each of the SMA outputs offers a typical isolation factor of 24 to 28dB between radio receivers. The PSC RF Multi SR Six Pack also has the ability to power external powered antennas or remote line amplifiers. There are two front panel mounted switches on the unit. One is marked "MAIN POWER" and this controls the over all power to the unit. The second switch is marked "ANT PWR" and this switch controls the power being sent to an external powered antenna or remote line amplifier. Both switches light up when in use. The entire unit is powered from any source of external DC power of 12Vdc at approximately 170 to 210mA. On the left side of the unit there are six TA3M mini XLR output connectors. These provide audio output from the three slot receivers. In addition, there are two Chassis mounted SMA connectors on the left side panel of the unit. These offer two additional RF outputs that can be used to feed another PSC RF Multi SR Six Pack or PSC RF Multi SMA or other similar device.

The PSC RF Multi Six Pack is equipped with two mounting holes for use in mounting the Six Pack to Sound Devices 664 and 688. These two screw holes line up with the factory screws on the Sound Devices units. This allows you to mechanically secure the Six Pack to your Sound Devices 664 or 688. See photo to the right.

FEATURES:

• provides power distribution
• provides low noise RF distribution
• DTV band-pass limited
• directly interfaces to the PSC Alexis Mixer
• can be used independently in ENG bags or on Cart Based systems
• compact and lightweight