About the product

iSMA-B-4O-H is one of the most easy to setup and versatile IO modules. Compatible with almost any BMS works on either Bacnet or Modbus. It has4x Digital Outputs (4DO) andcan be hand operated. Once you purchase one you will be up and running in minutes and safely use it on any project.

This module is fully compatible with any Modbus or Bacnet system including the following:Tridium Jace3, Jace6, Jace8000Compatible,Trend IQ3, IQ4 Bacnet IPCompatible,Siemens PX range,Cylon Bacnet controllers,Schneider Electric StruxureWare Bacnet controllers,OSS NeOSS building management controller,Priva Blue ID,Distech EC Bos,DELL EDGE GATEWAY 5000,Compatible with any Honeywell Centraline Hawk,Delta Controls Compatible IO Modules

• 4x Digital Outputs (4DO)
• Relay output (NC/NO) max. 8A, 250V AC/30 VDC

• Cortex-M3

Communication

• Interface RS485 half duplex
• Up to 99 devices on the bus
• Protocols: MODBUS or BACnet
• Baud rate: 2400 to 115200 bps

Power supply

• 24V AC/DC

Housing

• Dimension: 35x110x62 mm.
• Construction: plastic, self-extinguishing (PC/ABS)
• DIN rail mounting (DIN EN 50022 norm)
• Cooling: internal air circulation

Environments

• Operating temperature: -10C to 50C
• Storage temperature: -40C to 85C
• Relative humidity: 5 to 95%, no condensation
• Ingress Protection Rating: IP40 for indoor installation

Do you have a question about this product?

In the DOWNLOAD session you can find:
The ISMA driver for Niagara, which contains the ISMA device Palette
ISMA configurator which is needed for updating firmware and configure modules

For any help please contact our support here