Technical Specifications:

• Body Material: Plastic
• Base Material: Plastic
• Grill Material: Metal, with magnets
• Side Power Button
• Side Power Regulator for Handle
• Large Replaceable filter same as in Pro and V-Pro
• Number of Motors: 1
• Centrally Balanced Motor
• Continuous Motor Operation: Up to 6 years
• Dust Suction Power: 2.2 m/s (average value)
• Connector: DC-099, 5.5x2.5
• Power Supply: 2.5 A
• Dust Collection Area: 416.5 cm²
• Adapter Cable Length: 2.1 m
• Dust Collector Efficiency: 339.57 m³/h

1 - Year warranty coverage for any initial defects included

Key Features:

• Lightweight Design: The body and base are plastic, making the X-PRO almost twice as light as previous models.
• Ease of Use: A power button and current indicator ensure straightforward operation.
• Built-in Speed Regulator: Ensures smooth and consistent performance.
• Improved Dimensions: The model is lower and more convenient to use while maintaining high power.
• Trendy Colors: Available in white, gray, and pink to match any beauty salon's interior style.

DUST COLLECTOR OPERATION AND MAINTENANCE

1. Turn on the dust collector.
2. Set the necessary operational speed.
3. Follow the safety and device care rules during operation.
4. Take breaks during work and breaks to clean the device.
WARNING! Clean the filter after each session.
5. Always unplug the device before cleaning the filter.
6. Put on a mask and gloves.
7. Remove all remaining dust from the dust collector grid with a soft brush.
8. Remove the metal grid, which is fixed on the top of the case with magnets, and place it on the table next to it.
9. Prepare napkins in advance (wet ones are better), unfold them on the table. Remove the filter from the upper part of the housing, put the dirty part on a napkin. Lightly tap the edges of the filter to shake off the dust on a napkin.
10. Turn the cleaned filter over and insert back into the top of the housing.
11. Fold the used tissue and dispose of it.
WARNING! It is forbidden to use water or other liquids to clean the filter. Dry cleaning only. Replace the filter every 2 months!
12. Place the grid on top of the case on top of the magnets.
13. To clean the metal grid, apply a disinfectant solution to a tissue and gently wipe the metal body of the dust collector.
14. Take a dry tissue and be sure to wipe the dust collector dry.
WARNING! If you do not wipe the metal dry, it can become covered with corrosion.
(But if this happened, then you can clean the metal with a buff).
15. Turn on the dust collector. Connect the device to an AC outlet only.
16. Do not leave the dust collector unattended with the power cord plugged into the outlet.
17. Always unplug the device when finished.
WARNING! It is forbidden to use accessories that are not included in the delivery set. If the rules of care for the device are violated, the warranty is not provided.