The Wilkins 2-975XL2TCUFT is a Reduced Pressure Principle Assembly designed to protect potable water lines from both backsiphonage and backpressure contamination where health hazards exist.

Key Specifications:

• Size: 2 Inches
• Maximum Working Water Pressure: 175 PSI
• Maximum Working Water Temperature: 180°F
• Notable Certifications: ASSE 1013, cUPC, CSA B64.4
• End Connections: Threaded ANSI B1.20.1

Other Related Variants:

• 112-975XL2TCUFT: 1 1/2 Inches version
• 1-975XL2TCUFT: 1 Inches version
• 34-975XL2TCUFT: 3/4 Inches version

Materials:

• Body: Low Lead Cast Bronze ASTM B584
• Access Covers: Low Lead Cast Bronze ASTM B584
• Fasteners: 300 Series Stainless Steel
• Elastomers: Silicone and Buna Nitrile
• Polymers: Noryl™
• Springs: 300 Series Stainless Steel
• Ball Valve Handles: Stainless Steel

Typical Installation:

Local codes shall govern installation requirements. To be installed in accordance with the manufacturers' instructions and the latest edition of the Uniform Plumbing Code. Unless otherwise specified, the assembly shall be mounted at a minimum of 12 inches and a maximum of 30 inches above adequate drains with sufficient side clearance for testing and maintenance. The installation shall be made so that no part of the unit can be submerged. For indoor installations, an air gap fitting is required.

Standards Compliance:

ASSE Listed 1013; cUPC Listed; CSA Certified B64.4; AWWA Compliant C511; Approved by the Foundation for Cross Connection Control and Hydraulic Research at the University of Southern California; Meets NSF/ANSI/CAN 61 & 372; UL Classified; C-UL Classified

Features & Benefits:

• Health Hazard Protection: Provides protection against both backsiphonage and backpressure of contaminated water into potable water supply where potential health hazards exist.
• Lead-Free Construction: Meets NSF/ANSI/CAN 61 and 372 standards with less than 0.25% weighted average lead content for safe drinking water applications.
• Full Port Ball Valves: Features full port QT ball valves for maximum flow capacity and easy shut-off operation during testing and maintenance.
• Test Cocks Up Configuration: The Zurn 2-975XL2TCUFT includes test cocks up with integral male 45° flare SAE test fitting for convenient testing and maintenance access.

FAQ

Q: What is the required installation height for the Zurn 2-975XL2TCUFT?

A: The assembly must be mounted at a minimum of 12 inches and a maximum of 30 inches above adequate drains with sufficient side clearance for testing and maintenance.

Q: Can this backflow preventer be installed outdoors?

A: Yes, the unit can be installed outdoors with a protective enclosure. However, for indoor installations, an air gap fitting is required and must be provided by others.

Q: What is the maximum working pressure and temperature for this assembly?

A: The maximum working water pressure is 175 PSI and the maximum working water temperature is 180°F, with a hydrostatic test pressure rating of 350 PSI.

"Hydrate Everyone, Everywhere!" BottleFillingStations.com | Contact us