These CNC machined aluminum turn signal adapters allow the mounting of almost all accessories turn signals with M8 thread on the original turn signal holder of all water-cooled Triumph models.

The shape of the indicator mount fits exactly on the original mount of the Triumph motorcycles and is screwed to the original mount. The accessory turn signals are then simply pushed into the arm of the adapter and fixed with a grub screw.
So you can install accessories turn signals very easily and above all visually beautifully solved on his Triumph.
The adapters fit both front and back.

The adapters are supplied as a pair.
We also recommend ordering suitable turn signal plugs so that nothing has to be cut off on the wiring harness (see accessories in this description). Rizoma Plug and Play Turn Signals Adapters – 2016+ Triumph Classics – EE082H

The following turn signals from our range have an M8 thread and fit with the adapters:
All Rizoma turn signals / Motogadget pin turn signals / all Kellermann turn signals (except for the Atto - can use with the M8 Adapters available) / X-ARC turn signals.

With the adapter, all indicators on all motorcycles comply with the minimum distances required by law (exception for the Scrambler 1200 at the rear: here the Motogadget pin indicators must be installed with an additional indicator widening to maintain the specified distance - not supplied).

Sold as a pair

Turn Signals not included

Made in Germany