2.1.0 Version DASH Interface for BMW 

V2.1.0 is intended to work with BMW 1, 3, 5, 6 and 7 series in "new" chassis for chassis E60/E61(5') E63/E64(6') E65/E66(7') E87(1') E90/E91(3')

Make sure com port setup on your PC is the same as that in the software  

O/S: Windows

Tips: BMW DASH v2.1.0 only works ok on most cars before 2008, but not all. And cars post-2008 hardly works with BMW DASH, but BMW ICOM A2/BMW Creator C310 ok.

BMW Models Covered by Dash interface:

• 1 Series: E81/E82/E87/E88
• 3 Series: E30/E36/E46/E90/E91/E92/E93
• 5 Series: E28/E34/E39/E60/E61
• 6 Series: E24/E63/E64
• 7 Series: E23/E32/E38/E65
• 8 Series: E31
• X Series: X3-E83, X5-E53, X5-E70, X5-E71
• Z Series: Z1-E30, Z3-E36, Z4-E85/E86, Z5-E52
• MINI Series: MINI-R50/R52/R53/R55/R56/R57

2- systems tested no issues:

• Engine system
• Auto Transmission
• SRS
• ABS
• Cruise system
• Air-condition system
• EWS
• LKE
• BUS etc.

3- functions without issues:

• Connecting with all electronic control modules in the vehicle.
• For all electronic control units reading identification data, sw/hw versions, user information fields.
• For all electronic control units read and clear error (DTCs) memories – standard, shadow, history memory.
• Possibility to read & program memory of electronic control units (including CAS modules).
• Synchronization DME/DDE and CAS.