Intelligent Light Recognition

Using the unique, specially designed algorithm, Dimmer 2 recognizes the type of a connected light source and calibrates itself to set proper values. Now you can be sure that lights in your home are controlled in the optimal way.

Scene Management

Dimmer 2 offers an extremely intuitive scene management. The device will turn one of the light switch buttons into a scene trigger. Activating a selected scene becomes as simple as turning the light on. Just press the button while entering the room!

• Works with incandescent bulbs, 230V halogen, 12V halogen and dimmable LEDs
• Detects the bulb type and adapts the dimming behaviour:
  • Trailing-edge dimming - incandescent and halogen bulbs (resistive)
  • Trailing-edge dimming - LEDs and other resistive-capacitive bulbs
  • Leading-edge dimming - transformers and other resistive-inductive loads
• On/Off mode - supports non-dimmable loads (3-wire installation)
• Monitors and reports power - instantaneous (W) and accumulated power (KWh)
• Auto-off Timer - turns lights off after programmed time period
• Maximum load 250W (resistive), 225VA (resistive-inductive) and 200VA (resistive-capacitive)
• Supports 2-wire (no neutral) and 3-wire installations - further information is in our 2-wire/3-wire guide
• Second switch input for controlling additional associated devices or 2-way installations
• Various switch types - momentary (default), toggle, 1-way and 2-way
• May require Fibaro Dimmer Bypass 2 for loads less than 50W. Only use Dimmer Bypass 2 (FGB-002) - do not use the old FGB-001 Bypass as this will cause damage to Dimmer 2!