20% OFF shipping at www.midwoodautocraft.com on orders over $79 + up to 10% OFF products

Ship to:

/ English / USD

New Arrival

Air Freeshipping Best Sellers Nihao Choice

Sourcing

Shipping Calculation

home > Z-Wave Plus MCO Home Fan Coil Thermostat - 4 Pipe > Z-Wave Plus MCO Home Fan Coil Thermostat - 4 Pipe

Z-Wave Plus MCO Home Fan Coil Thermostat - 4 Pipe main image 0

Z-Wave Plus MCO Home Fan Coil Thermostat - 4 Pipe main image 1

download picture

description

Report this seller or product

Z-Wave Plus MCO Home Fan Coil Thermostat - 4 PipeFan Coil Thermostat 4 Pipe MCOHome Fan Coil Thermostat is a Z Wave enabled device for indoor temperature control. It is mainly applied to a 4 pipe Fan coil system. It can read room temperature and local time, and automatically control fan speed based on the temperature difference. The device is of high reliability and practicability. This product can be included and operated in any Z Wave network with other Z Wave certified devices from any other

Shopping security

Each payment you make on thelockerguy is secured with strict SSL encryption and PCI DSS data protection protocols

product description

Why choose thelockerguy wholesale?

Fan Coil Thermostat - 4 Pipe

MCOHome Fan Coil Thermostat is a Z-Wave enabled device for indoor temperature control. It is mainly applied to a 4-pipe Fan coil system. It can read room temperature and local time, and automatically control fan speed based on the temperature difference. The device is of high reliability and practicability. This product can be included and operated in any Z-Wave network with other Z-Wave certified devices from any other manufacturers.

Multi-Mode Operation

This thermostat is designed for controlling fan coil units in central AC systems with 4-pipe configurations, featuring a tempered glass panel with capacitive touch buttons and a clear display for essential control information. It supports Cooling, Heating, and Ventilation modes and provides intelligent on/off control for a 3-speed fan and electric valve.

Installation

Step 1: Remove the steel frame from the device, and secure it onto the junction box with two screws.
Step 2: Insert all wires into the right terminals and tighten screws. The wiring diagram is shown below.
Step 3: Attach the wired device on A points of the steel frame as shown first, and then push the whole device into junction box.
Step 4: Confirm the device is well mounted, power on and it is ready to operate.

Including and Excluding of Z-Wave network

Under the shutdown state, press and hold down arrow to enter interface for inclusion or exclusion of Z-Wave network. Before device included into network, (- - -) will display on the screen. Then press down arrow once, device will enter learning mode to get a node ID. If inclusion is success, a node ID will display on the screen in a few seconds. A node ID can always inform us whether the device is in the network or not. Note: Follow the same steps to exclude the device from the network. After inclusion, turn off the device and then turn it on. Now the device is ready to be operated by controller/ gateway in Z-Wave network.

Z-Wave Plus MCO Home Fan Coil Thermostat - 4 Pipe

Name: Z-Wave Plus MCO Home Fan Coil Thermostat - 4 Pipe
Brand: www.midwoodautocraft.com
SKU: 49370823632
Price: 105.00 USD
Availability: InStock
Rating: 4.3375 (491 reviews)