5 gpm 3000 psi Key Start Pressure Washer Skid Mount Cold Honda Approved

Honda approved? Pressure-Pro sends this brand new unit to MTA Honda for testing and Honda approves the assembly. All components are brand new and have never been used. We sell a lot of these units and keep the price competitive.

5 gpm 3000 psi Honda GX390 13 hp General Pump V-belt, 50 mesh inlet filter, commercial external bypass EZ start unloader, low oil shutdown, thermal relief valve, gun/wand assembly with quick connects, 50' high pressure grey hose with quick connects, battery box included, 5 quick connect nozzles, 20% high draw chemical injector assembly with quick connects.

Must tighten belt if needed after a month. A clogged nozzle or nozzles that are sized too small for this unit will break the belt.

This unit should be supplied from a tank. Please add a plumbing kit: PL-4-TA or PL-4-TO.

We highly recommend adding the best high pressure 3/8" DN10 ball valve (6292.SM) to this order to allow you to turn off the flow of water to switch from the gun to a Whisper Wash 16" Ultra surface cleaner (6717).

The 16" Whisper Wash Ultra with the upgraded 3/8" high pressure hose is the perfect complement to this cold pressure washer. You will need 3.0 25-degree nozzles (1769)  for your surface cleaner using this unit.

Install a high temperature Hudson float valve (Hudson-HT) using everything you need to install it with our Hudson Assembly (Hudson-A or HB). The Hudson assembly installs into the very top of the tank using a bulkhead and garden hose connection to prevent the tank from over-flowing.

Add a Kyle Davis shooter nozzle, SN4 and a 6540-4, a M5DS (7019 and a 5200 hex nipple to your order) for the ultimate reach.

Use a 6.0 turbo nozzle (4558 and 1627) for this unit.

Can not be shipped inside the state of California 

 SKU: PW.S53AE