Shopping security
CR2 29600 Duramax Crankshaft Pin kit
Duramax Harmonic balancers are known for shearing the alignment pin at high RPM. This kit is used to drill, and repin the balancer with out having to pull the crank shaft out of the engine, to have a key machined in. This pin kit can be used with the engine still in the truck, only needing to remove the radiator, and intercooler. Remove the broken pin, and install the balancer in its original postion. 180 Degrees from the factory pin location. Use the drill jig to drill 3/4" - 1" deep. Install the hardened roll pin, and tighten the OEM crankshaft bolt with washer to factory torque.
As of 10/1/2024 All CR2 Crankshaft pin kits WILL work with Fluidamper harmonic dampers.
Ships within 48 hours · Estimated delivery Jul 6 - Jul 11
US$40
Get nowSign up to your membership to get coupons up to
15%
Get nowOpportunity to enjoy order discount up to 15% off
Top-Converting Item to Boost Your Average Order