The ROE-50 reverse osmosis system delivers high quality clean, filtered drinking water at an affordable price. It removes up to 99% of all contaminants, such as chlorine, taste, odor, toxic fluoride, arsenic, lead, and chromium. The product is made in Taiwan  and customer should reduce the pressure of the house to 60 PSI and use a leak controller device to automatically shut the water off in case of any leaks. It is highly recommended to change the entire system once every 5 years. This system will provide users with trouble-free, high quality drinking water for many years to come!

Enjoy unlimited fresh, clean, great tasting water right at home for the best quality water for cooking and making delicious coffee, tea, and ice. Save money, time, and hassle of buying costly, bottled water and live healthier with ROE-50 drinking water system.

This system has been tested to ensure it will operate correctly. The following periodic maintenance is recommended so your system will provide years of trouble-free service.

Sediment Filter: Removes large particles such as sand, silt, rust, dust, mud. Replaced once every 6 months.

Pre- Carbon: Removes chlorine in the feed water and protect membrane from chlorine damage. Replace once every 6 months.

Post Carbon: Removes chlorine in the feed water and improves the taste of the water by removing chlorine taste and odor. Replace once every 6 months.

Membrane: Reduces/ removes up to 99% of All contaminates such as such as chlorine, taste, odor, toxic fluoride, arsenic, lead, chromium and many other chemicals and minerals from source water. Replace once every 2-3 years.

Final Polishing: Activated granular carbon to once again remove the possible taste caused by the storage tank bladder. Replace once every year.

OPERATING PARAMETERS:

OPERATING TEMP: Min 4°C (39F°) Max 38°C (100°F)

WORKING PRESSURE: Min 35 PSI (241kPa) Max 60 PSI (413 kPa)

FLOW RATE: 0.5 GPM (1.89 LPM)

PRODUCT DIMENSION:

RO Module: H: 18”, W:15”, D: 6”

Tank: H: 14 ½ ”, D: 11”

Faucet: H: 9 ½”

IMPORTANT NOTE: This product is not manufactured or assembled by Aquatron, Inc. To eliminate any possible leak or damage, make sure the INCOMING WATER PRESSURE MUST NOT EXCEED MORE THAN 60PS.

NOTE: DO NOT use with water that is microbiologically unsafe or of unknown quality without adequate disinfection before or after the system. It is essential for proper operation that the user follow the recommended maintenance and filter change – out schedule provided in user manual.