The Progress Adjustable Sway Bar for the 2013-16 Dodge Dart! So you have upgraded the wheels and tires, and now the traction has increased. More traction means more body roll, and the 'leaning' during cornering follows suit. The fix is simple! Bolt-on a Progress rear adjustable sway bar, and tame that unnerving body 'lean' while cornering. Now enthusiasts can sport-tune their 2013-16 Dodge Dart for improved handling with an upgraded Progress rear Anti-sway bar.

This bolt-on suspension component will minimize the uncomfortable body 'roll' during sport driving, and reduce understeer or 'plowing' during cornering. This rear sway bar replaces the OEM 14 or 15mm bar with a larger 19mm diameter alloy steel anti-sway bar and new polyurethane bushings. The end of the sway bar has two adjustment locations, so you can fine-tune the roll stiffness. The replacement polyurethane bushings are firmer than the OEM rubber units, so the new bar responds faster to cornering inputs. This Progress sway bar upgrade will also improve highway tracking and speeds up the steering response. The kit is complete, including synthetic chassis grease & installation instructions.

-Less body roll means more traction, faster cornering speeds, and increased driver confidence.
-Polyurethane bushings produce crisp response on turn-in.
-Progress Anti-sway bars are cold-formed in-house using our custom-built precision bending equipment. Both laser-cut and CNC bar ends are MIG welded in place using a precise fixture for an exact fit.

Rear Anti-sway bar rates:
OEM 14mm diameter 53 #/inch
OEM 15mm diameter 70 #/inch

Progress 19mm (soft setting) 160 #/inch
Progress 19mm (firm setting) 209 #/inch

Adjustment Range: 2 hole
Reuse your factory endlinks, or if you do not have any, buy some from your dealership or from Rockauto/Amazon,etc.

All sway bars are powdercoated metallic gray with one year limited warranty.

The anti sway bar clamshell mount nuts are rated at 46 ft lbs for tightening down.

The sway bar link nuts are rated at 41 ft lbs.