This 17 GPM ALL-FLO Softwash system start up kit includes the following:

•  1/2" Kynar body with Santoprene diaphragms 'Top of the line and best air diaphragm pump in the world', model AFKE05, 17 GPM AODD pump.
•  200' of 1/2" Yellow Flex Tech RT hose with 316 stainless steels crimped on hose ends (no hose clamps)
• Suction hose assembly with the original slotted PVC suction filter for sodium hypochlorite and soft wash chemicals.
•  Sch 80 PVC ball valve with Viton seals applicator assembly included with package to provide the greatest distance.
• Jrod nozzle holder with long range and fan pattern nozzles.
•  Upgraded air regulator/filter with glycerin filled stainless steel gauge with set of high-quality brass air couplers and plugs (set regulator to 80 psi maximum) drain compressor tanks at bottom daily.
•  10-12 ft length of very high quality 3/8" ID air hose assembly with crimped on hose ends (longer and shorter lengths available).
•  Two spare stainless-steel couplers.

 You should be able to reach between 30-45' using this set-up powered by an adequate air supply. Choose the 5/8" id kit for 40-60' reach.

       Viton diaphragms are not the best choice because of the following reasons according to All-Flo: Santoprene and other thermal plastic elastomers (TPE) will have a very long flex life due to the nature of the material. This is especially apparent when comparing them to FKM and PTFE diaphragms, which tend to have a low flex life. When selecting a diaphragm, the chemical compatibility and the natural flex life should be considered. In most cases, a “B” rated Santoprene or other TPE will outlast an “A” rated FKM (Viton) or PTFE diaphragm. This is because both the “A” and “B” rated diaphragms will normally fail due to their natural flex life before they experience chemical issues. PTFE should predominantly be used when a TPE is not chemically compatible with the process fluid, and FKM (Viton) is traditionally used for high temperature applications that go above the other materials maximum temperature limits. In short, Santoprene has a high flex life and FKM (Viton) has a very low flex life with flex life being its weakness.

       ***All fittings should be installed using non-drying liquid Teflon such as RectorSeal t plus 2 (Can be purchased at any hardware store in the plumbing section) never use Teflon tape on anything in these related industries. ***

       The minimum 6.5 hp gas powered air compressor, PVC sch 40 1.5" id pipe sleeve for the suction hose assembly and tank are not included and should be purchased locally to save you money on shipping.

       You will need to install a desiccant filter between the regulator we supply with this kit and the pump using a hex nipple or length of air hose.

Please read the directions:

1. Install the regulator using the arrow pointing to the pump >>>>>
2. Install a submicronic compressed air filter such as the motor guard m-45.
3. The Titan 4318S reel and a street 45 (2354) is a perfect addition to this kit. Be sure to add the jump hose (FTY08) and two CSS.

The main advantages of using an ALL-FLO Kynar air diaphragm pump for soft wash or low-pressure chemical application are listed as follows: 

       The All-Flo 1/2" Kynar air diaphragm pump, AFKE05, is capable of handling soft wash chemicals. It is a perfect choice for residential and commercial cleaning. It does not have to be rinsed after every use, has a 5-year warranty, and will pay for itself and the gas-powered air compressor in the amount of money saved on chemical conserved using the air diaphragm pump.

 Check out the installations on YouTube channel: Rex, The Pump Guru.

 Https://www.youtube.com/user/roofcleaningequip

       Since the inlet port of the pump is 1/2", the general rule of pump plumbing indicates that the inner diameter of the supply line should be twice the inner diameter of the port and will require a minimum of a 1" ID hose. The 1" suction hose should not collapse and should remain somewhat rigid but allow flexibility under pulsation. Never use garden hose fittings on the suction side of any pump as they allow air to siphon into your suction side of the pump. Our Pump Guru, Rex, invented PWP's idea of using a PVC slotted chemical tank filter for sodium hypochlorite. The filter is composed entirely of PVC and will not rust or decompose or shatter into small pieces after constant submersion into a soft washer's chemical tank or roof wash mix. The filter is made be assembled to fit exactly into the bottom of a 5-gallon bucket, various drum sizes and tanks. 

SKU: A5Y28B