Hollyland Pyro S 4K HDMI/SDI Wireless Video Transmission System is a hollyland pyro s HDMI/SDI wireless video transmitter and receiver system with 4K30 transmission, up to 1300 ft / 400 m line-of-sight range, 50 ms latency, ADH 2.4 GHz/5 GHz dual-band operation, UVC/RTMP streaming, and Filmgear Canada support for Canadian camera-to-monitor workflows.

Product Video

Watch the Pyro S video to judge transmitter and receiver setup, HDMI/SDI workflow, multi-monitor use, and whether the latency and range fit your monitoring job.

Product Overview

Pyro S is the Pyro option for buyers who need a transmitter and receiver set with both HDMI and SDI paths. It can send one transmitter to multiple receivers, supports 4K30 transmission, and gives crews UVC/RTMP options when the wireless video feed also needs to reach a computer or livestream workflow.

For wireless video, a black screen is worse than lower resolution. Buyers should judge Pyro by the actual monitoring job, RF environment, receiver count, latency tolerance, and whether the feed is for focus pulling, director review, client viewing, livestream support, or general video village.

Best Use Cases for Hollyland Pyro S

• Camera-to-director wireless video on small and mid-size sets
• HDMI/SDI mixed camera and monitor workflows
• One transmitter feeding multiple receivers for crew monitoring
• RTMP or UVC workflows where a computer or livestream path is part of the setup

Key Features

• 4K30 HDMI/SDI wireless video transmitter and receiver system
• Up to 1300 ft / 400 m line-of-sight range
• 50 ms low-latency transmission in Hollyland test conditions
• 2.4 GHz and 5 GHz dual-band operation with Auto Dual-Band Hopping
• Broadcast Mode supports one transmitter to up to four receivers
• UVC and RTMP streaming support

How It Compares

Choose Pyro S when the job needs HDMI/SDI transmission and a separate monitor or video village. Choose Pyro 7 when the receiver and 7-inch monitor should be combined. Choose Teradek Bolt when near-zero-delay focus-pulling or higher-end RF robustness matters more than budget and ecosystem simplicity.

Compatible Accessories and Related Gear

Build the Pyro monitoring setup with same-series Hollyland transmitters, receivers, and monitor options: Hollyland Pyro S, Hollyland Pyro 7, Hollyland Pyro Video Transmission and Monitoring Kit.

Hollyland Pyro S: Value Assessment

The value of Pyro S is giving owner-operators and small crews a practical HDMI/SDI wireless video set with multi-receiver options. It is not the same buying decision as a premium Teradek kit; the right use is director, client, livestream, or general monitoring where 50 ms class latency is acceptable.

Who Is This For?

Choose Pyro S for owner-operators, event teams, small commercial crews, and video producers that need HDMI/SDI wireless monitoring for directors, clients, and crew viewing.

Who Should Choose Something Else?

Choose something else if the job is critical focus pulling, IMAG, large concert/stadium RF, or any environment where the monitoring path cannot tolerate compression or latency. In that tier, Teradek Bolt should be considered before a budget wireless system.

In the Box

• Pyro S Transmitter x1
• Pyro S Receiver x1
• Paddle Antenna, 2.4 GHz and 5 GHz x7
• Rotatable Cold Shoe Mount x1
• USB-C OTG Adapter x1
• 12V/2A DC Power Adapter x1
• Quick Guide x1
• Hollyland Ecosystem Leaflet x1
• Warranty Card x1
• Packing List Card x1
• Compliance Information x1

Specifications

FAQ

Is Hollyland Pyro S good for focus pulling?

It can work for general monitoring, director viewing, and client viewing, but critical focus pulling depends on latency tolerance, RF conditions, and the camera department standard. For high-pressure focus work, compare against Teradek Bolt before buying.

What matters most in a wireless video system?

Reliability, latency, range, receiver count, HDMI/SDI routing, and RF environment matter more than resolution alone. A clean 1080p monitoring feed is usually more useful than a higher-resolution system that drops signal during the take.

Does Pyro S support HDMI and SDI?

Yes. Pyro S uses HDMI and SDI input/output workflow, with the transmitter taking HDMI and SDI input and the receiver providing HDMI and SDI output.

How many receivers can the Pyro system feed?

Hollyland lists Broadcast Mode support for one transmitter feeding up to four receivers. App connections and Broadcast Mode can affect range, so plan the receiver count around the actual set layout.

Should I choose Pyro S, Pyro 7, or Teradek Bolt?

Choose Pyro S for transmitter/receiver wireless video, Pyro 7 when a 7-inch wireless monitor is part of the package, and Teradek Bolt when near-zero-delay professional wireless video is the real production requirement.

Where to Buy in Canada

Filmgear Canada sells Hollyland wireless video systems for Canadian camera crews, livestream teams, owner-operators, and production companies, with Vancouver-based help planning HDMI/SDI routing, receiver count, monitor choice, and video village workflow.