Twist start out as straight lines on tube and get twisted around a few times to create the twist effect.

Wig wag, is made from twisting the piece clockwise a full turn, waiting for that to cool down, and then twisting counter clockwise a turn. tHis creates the back and forth " wig wag" motion.

Reversed axis spiral, you can spot a reverse axis by two spirals on the front and back of the piece. The design is built horizontally on a blow tube, a hole is then popped off the side and a new blow tube is attached. Next the old blow tube is taken off and the whole thing is re-melted and shaped which reverses the axis and makes the design vertical. Essentially the design is melted and shaped twice.

6mm bead holes work well for super small dread or really new dreads that have not full tightened yet. Also work well for hemp jewelry.
8mm small size bead holes are a great for small size dreads or hemp jewelry.
10mm medium size bead hole is the most versatile and should fit somewhere on almost any head of dreads. Also a good size for really thick hemp jewelry
12mm large size bead hole is still pretty common size for dreads and fits easy over ends that are a little chunky.
14mm Extra Large size bead hole is for some chunky dreadlocks or places where multiple dreads have grown into one
16mm super large size bead holes are for the chunkiest of dreads. If you think you need something bigger than this, contact me.
*Please check the Dread beads Comparison chart to get an idea if this is the right size for you.

Dreadlock size comparison for dreadlock beads;
Extra Small or 6mm about the size of the end of a chop stick
Small, 5/16 or 8mm - diameter of a no.2 pencil
Medium 3/8 or 10mm - diameter of a AAA battery
Large, 1/2 or 12mm - diameter of Sharpie Marker
Extra Large, 9/16 or 14mm - diameter a large Crayola Marker
Super Large, 5/8 or 16mm - diameter of a Dry Erase Marker

These are sample pictures and may not be the exact beads sent to you.

Handmade from Borosilicate/ Pyrex glass in Bremerton, Wa