Pump made ready / slap happy EZ3040g-vrt3-310EZ, bypass, pressure actuated.

Easily replace your old pump with a pump made ready. Simply remove your old pump and slide this PMR onto the shaft of your gas engine. This pump made ready consists of the pump, a VRT3-250 adjustable pressure actuated unloader with a thermal relief valve to help prevent overheating, along with an inlet filter. All fittings are quick connected. 

Features:

Solid ceramic plungers
Standard SAE J609 gasoline mounting flange for up to 13 hp engines.
Forged brass manifold with an exclusive lifetime warranty and 4:1 hydrostatic rating.
Die-cast, anodized aluminum, oil bath crankcase.
Premium roller bearing
Unitized stainless steel inlet and discharge valves.
Available in "l" left-handed version

Specifications:

Triplex plunger pump
Direct drive with gas flange
Maximum volume: 4.0 GPM
Maximum discharge pressure: 3000 PSI
Maximum inlet pressure: 125PSI 
Maximum pump speed: 3400 RPM 
Minimum horsepower requirements: 12.3 HP for gas engine
Bore: .591" (15mm)
Stroke: .374" (9.5mm)
Crankcase capacity: 14 oz. Nondetergent SAE 30W oil
Maximum fluid temperature: 165 degrees F. 
Inlet port thread: 1/2" FPT
Discharge port thread: 3/8" FPT
Shaft diameter: 1" id gas flange
Dimensions: 8.8" x 9.7" x 6.5"
Weight: 25 lb.

Lubrication: Fill the crankcase to dot on oil gauge window per specifications with SAE 30W oil. Change the oil after 40-hour break-in period, then every three (3) months or 500-hour intervals thereafter.

SKU: 2992