please note - tunes are not available for 2025+ Triumph Bobber and Bobber TFC as these are Euro 5+. Kit will install but no tune can be provided. 
PowerKit Bobber 1200 / Speedmaster 1200 Stage 3 consists of:

• Airbox Eliminator Kit
• Tune ECU RAISCH special mapping for direct transfer to the ECU

Peak power + 13 hp.
Peak torque + 4.5 NM
Maximum rom increase + 500 rpm.

At approx. 6500 rpm you even achieve an increase of 14 hp and 15 NM

At approx. 5000 rpm there is already an increase of 6 hp and 9 NM

As you can see from the power curves, the engine becomes significantly more powerful from the mid-range. The engine revs up more willingly, simply feels freer and livelier and can now breathe in really freely! In the upper rev range, where the engine is very tired with the standard set-up and it is hardly worth revving higher, you gain significantly in revving pleasure and, of course, power. This helps when overtaking and is fun.

Throttle response is beautifully smooth and load change reactions are significantly reduced, which noticeably improves drivability.

The intake noise through the individual air filters is simply brilliant, but not too concise!

The increase in performance and improved driveability is active in all drive modes.

The driving modes with their respective characteristics can of course still be switched and used.

The data in the diagrams are rear wheel measurements, see general description in the product group. Our mappings were elaborately determined on the test bench with a lot of time invested.

These mappings can be downloaded to the vehicle yourself via app + Bluetooth OBD adapter (see below for more information), resulting in a plug & play solution. This saves you having to do your own tuning on third-party test benches, which are also very expensive. In addition to the increase in performance, this also results in a more harmonious and smoother running engine. We increase the rev limit by 500 rpm, which is within the absolutely healthy range. This kit is of course not street legal and is only intended for use on non-public roads. It is relatively easy to install yourself.

When ordering, the complete VIN number must be entered in the comments field of the order process.

Installation and mapping can be carried out at our premises by appointment for an additional charge.