Our Water Chiller Accessory Package comes with the necessary items to set up any of our standard water chilling units. Each package comes with a pump, tubing adapters and vinyl tubing.

The Danner 9.5 is fine for most chiller setups. If the tubing lines run over 15-20 feet, you may want to consider getting the Danner 18.

3/4" tubing is typical and will work fine with the 1/2HP or 1HP Chillers.

– We don’t recommend using the pump externally – The face of the pump is delicate; We do not recommend using a fitting on the face side of the pump. There is a high likelihood that if a fitting is tightened to the face side of the pump, it will crack.

– We don’t recommend this pump to be ran submersed for cold therapy. – Getting in the water with the pump is not recommended as it is not GFCI protected equipment and has a possibility of electrifying the water.

Filter recommendation:
Penguin Chillers Cold Therapy Replacement Filter (10" x 2.5", 50 Microns, Pleated)

Filter housing recommendation:
Geekpure 10-Inch Whole House Clear Filter Housing - 3/4"NPT Brass Port-Fit for 2.5" x 10" Filters