Upgrade Your Stock A-Arms
Bigger tires, more stability, and stronger suspension mean you can do more and play harder in your Ranger 1000. That’s what you git when you install SuperATV’s Polaris Ranger 1000 Atlas Pro 2" Forward Offset A-Arms. They're like nothing you've seen before—they're 0.5" larger than your stock A-arms and 0.25" larger than our standard rear offset A-arms. Our tubing is huge—1.5” in diameter. And you get a 2” forward offset for more stability and the room to run 33" tires in the front.

Bigger and Better with Atlas Pro Tubing
Go ahead and list all the things you can do with bigger and stronger A-arms. Now do them. Thanks to our clever design, the tubing for these bad boys measures 1.5" in diameter with walls .183” thick. This gives you the strength and stability for those hellish rides with the boys. And if an increase in size wasn't enough, we've powder coated them for added durability. So get on it, and knock one of your "to-dos" off your list.
We're so confident in our A-arms that we're selling them with a lifetime warranty. So ride how you want, knowing we've got your back.

A Forward Offset Adds More Stability
The sky is the limit—these Polaris Ranger control arms give you an additional 2” of ground clearance. With 2” of added height added to your machine, you can roll over the logs, stumps, and boulders that you used to avoid. And they come with a 2” forward offset, increasing your wheelbase by moving the ball joint 2” forward. Plus, the 2” offset allows you to run 33” tires without adding a lift kit.

Optional Adjustable Pivot Blocks
Our high-clearance A-arms also come with adjustable pivot blocks, allowing you to change your camber. Paying attention to camber is very important when adding a lift kit or larger tires. You'll want to adjust it to eliminate premature tire wear. We take it one step further by pre-adjusting your pivot blocks to match your machine's stock specifications, so you don't have to mess with it if you don't want to.

Includes a Bigger, Better Tie Rod Kit
The massive, offset tubes on these control arms need a beefier solid steel tie rod kit with the strength and length you need to match your Atlas Pros. These rods use chromoly tie rod ends that can handle some seriously hard riding and rough terrain. The heims are tough as nails, so you can get down and dirty without worrying about busting your ride.

Let SuperATV Do the Work—Preassembly Available!
Want to spend more time on the trails and less time in the garage? Purchase a set of SuperATV ball joints with your A-arms, and we’ll install them for you for free! We save you money and time so you can get back to doing what you love.

NOTE: You must re-use your stock ball joints if you don’t select a pre-installed ball joint at checkout.