The 450 flatbed is designed to fit to the CEN Ford F450 Dually Truck.

To complete the assembly you will need the following (sold separately):

• Magnets:
  • 24 3mmx1mm magnets for the bed doors
  • 6 9mmx3mm magnets for the cab mount and head rack
• Screws:
  • 28 M3x8mm button head screws
  • 4 M3x15mm tapered screws
• Thin wire for door hinges (paper clip wire will work)

Installation notes:

• To attach to the flat bed to the chassis, remove the rear shock towers and use 4 M3x8mm screws to attach bed through same chassis plate shock towers mounting holes. Use 2 M3x8mm screws through the front chassis lower bulk head for the front lower mounts.
• The bed also requires a 60/65mm shocks in the rear and move the lower mounting position down to the link mount.