BRAX MATRIX ML3

The new BRAX MATRIX ML3 cone midrange drivers are a masterpiece in their own right - handmade in Germany using the latest technology and the highest quality materials. However, they bring their perfection to bear as part of a high-quality, fully actively operated sound system. Here they convince with the extraordinary sound and level capabilities that one would expect from a product from the reference brand BRAX.

The design signals high quality, the exquisite components "Made in Germany" guarantee the best functionality and pure, unadulterated music reproduction. The aerodynamically shaped die-cast aluminum basket ensures optimal voice coil ventilation, an extremely low-reflection rubber surround ensures an incomparably balanced frequency response in the upper transmission range.

The extraordinarily stiff and very light paper cone with the new "MicroSphere" coating makes a further contribution. With this patented technology, hollow ceramic microspheres with a diameter of just 75 µm are embedded in a polymer layer and applied to the membrane. This special coating not only increases the rigidity of the cone, but also its internal damping. Instead of weighing it down, this unique stabilization ensures lightness, a lower overall quality and outstanding precision in sound reproduction.

In order to meet our high quality standards, the loudspeakers are hand-selected for a perfect sound interplay and only put together in pairs based on their acoustic parameters and recorded with a serial number in a service database. The packaging in an elegant wooden box completes the whole thing and once again underlines the high-end philosophy of the BRAX brand. A stainless steel mounting ring set including grid (MR3) is available as an option. Depending on the installation position, the solid stainless steel ring can be used as a mounting ring or to hold the grille.

features

Extraordinarily stiff and very light paper cone with a new "MicroSphere" coating made of hollow ceramic microspheres, embedded in a polymer layer

Low-reflection rubber surround for balanced frequency response in the upper transmission range

Aerodynamically shaped die-cast aluminum basket with optimal voice coil ventilation

Extremely precisely manufactured, ventilated neodymium magnet system for optimal linear magnetic flow

Technical specifications

Power RMS / Max. P100 / 150 watts

(high pass > 300 Hz at 24 dB/oct.)

impedanceZ4Ω

DC resistance re3.4Ω

frequency range 250Hz - 8,000Hz

resonant frequency Fs80Hz

mechanical goodnesssqm2:21

electrical goodness Qes0.33

overall grade Qts0.29

indulgencecms1220 µm/N

equivalent volume vase2.09L

power factor BI4.1 tm

Efficiency 1W/1mSPL87dB

membrane area sd35 cm²

moving mass Mms3.3g

membrane material Paper cone with "MicroSphere" coating

made of hollow ceramic microspheres, embedded in a polymer layer

mechanical resistance rms0.74kg/s

voice coil diameterO25mm

voice coil winding width 6mm

Max. linear diaphragm strokeXmax+/- 1.5mm

outer diameterO92mm

installation diameterO76mm

installation depth 34mm

Recommended case volumes  

Closed housing with at least 250 ml net volume  

net volumes Recommended DSP / amplifier settings

0.4 liters (system resonance: 200 Hz) Separation frequency: 350 Hz

Min. edge steepness: 12 dB/oct.

0.8 liters (system resonance: 155 Hz) Separation frequency: 300 Hz

Min. edge steepness: 12 dB/oct.

1.2 liters (system resonance: 140 Hz) Separation frequency: 250 Hz

Min. edge steepness: 24 dB/oct.

Note: The housing should always be completely filled with insulating material.

scope of delivery

2 x high-end cone midrange BRAX MARIX ML3

1 x Allen key

1 x certificate

1 x data sheet

We're a genuine UK based company with over 30 years experience and full back up technical knowledge Your sale is important to us whether you purchase a multi-media system or a tax disc holder you can be assured of our 100% commitment If you do not see what you are looking for please ask as we are adding new items every day Please note - some items may incur extra shipping charges that have to be sent by courier and are too large / expensive to be sent by Royal Mail (for example headlamps, headunits, speakers, lowering springs etc) to the following postcode areas, Channel Islands, BT, most IV, HS, KA-27-28, KW-15-17, AB30-38, AB44-56, FK17-99, G83, KW1-14, PA21-40, PH18-26, PH30-41, PH49-50, all ZE, IM, and any other non mainland postcodes. Please also note that delivery times are normally 2-3 working days for these postcode regions.