"Medieval Shriekers are the oldest entities in magical household protection technology! Many will find them familiar as they have often been depicted in the margins of classic tomes such as Rhases' Remedies for Rambunctious Imps and The Gentle Art of Fiend Binding by Florina Oleander. These reliable sentinels will deter any being, no matter how undead/disguised/buffed, with an ear shattering howl. It is recommended to install a magical scram button to instantly cut off their scream as they are also prone to getting stuck and unable to stop ( all water based matter will boil after 5 minutes of this so haste is imperative!) When not screaming Shriekers tend to snooze and are poor conversationalists."

***PREORDER- PLEASE ALLOW 4-6 WEEKS FOR FULFILLMENT! ***

12" wide wall plaque! These will be hollow cast in grey urethane.  Teeth should be glued in, I recommend not gluing in the teeth until you have painted the inside of the mouth as this make it easier to get in there with a brush!

There will be a lip of flashing for nold purposes but it is meant to be trimmed off. There may also be voids in the tiny spike details that need to be filled in  (The small bubbles will not be present in your cast, picture is of the master casting before clean up):

Check out the entire tutorial page for ideas and tips.

Buyers will receive a fulfillment notification through the email provided by the buyer during purchase once the mask has been packed. A tracking number will be sent once the mask is on the way! Please check your spam filters and make sure you are checking the correct email account! Any production delays will be mentioned on the updates page.

The basics:

-This is for a cast urethane unpainted, unfinished kit. It includes one ( 1) head cast and four (4) teeth. 

- These are produced one at a time in my own studio. The buyer will need to sand/remove the flash edges, fill any small surface air bubbles, reinforce areas and heat to shape the mask to fit their own face if needed. 

- A plastic nipper, a rasp , sandpaper or a dremel can be used to refine edges. Here is a little more detailed info. Buyer can add upholstery foam for comfort and fit. Some craft/paint/kit building knowledge is recommended. I cannot provide build help beyond the info included here and in links provided.

- Please be sure to provide the correct address when placing your order, all orders will be shipped to the address im provided with and cannot be changed after the order is placed. No exceptions, sorry!

- There are no refunds on pre-orders.

- Please do not buy if any of the above is an issue!

- If you want any more info on buying from my shop please go through the FAQ/policy page in my shop: http://missmonster.myshopify.com/pages/f-a-q

- This kit can be primed with any spray primer and painted with acrylics or whatever you prefer. Seal with clear coat to prevent scuffs after painting.

- This urethane is sensitive to heat. Please keep it out of direct prolonged sunlight as it can warp under it's own weight when hot.

- This is a project that should be attempted by adults or under adult supervision. Please read all safety warnings on materials you use. I am not responsible for any injuries sustained while customizing these masks.

By purchasing this you acknowledge that you have read and agree with the shop's policy page and have read and agree to comply with all of the information on this page.

I have a TON of tutorials and process/creation information on my patreon!