LED: 5050SMD type 3x4 12 stations 3 pieces (durability has been improved by changing specifications) 5050SMD type 7.5W 5 stations S25 socket 2 pieces Compatible voltage: 24V (12V is written on the box, but it is for 24V) ) Compatible socket: T-10 (step LED) BA15S parallel pin (boarding/exit & driver's seat) LED color: White (6000K) size: 12 steps 18mm x 40mm x 2mm 5 steps S25 outer diameter 18.5mm x total length 51.5mm

●This is a set of 12 J-Bus step lights, entrance/exit lights, and driver's seat lights using 5050SMD, which was highly requested. ●For J-bus high decker (deluxe). ●The base of the step light is 2mm thick, and the wiring and double-sided tape have been newly designed to achieve high quality. ●This time, the specifications of the step light have been changed and it is now a T10-specific type, and the back side is also flattened to eliminate wiring troubles. ●In addition, the main components are installed in the middle of the wiring to support high voltage. ●To install, just replace the normal one and stick it on the glass surface with double-sided tape. ●The 7.5w 5 LEDs are set at the entrance and exit and driver's seat using S25 parallel pin sockets. ●This is our original product, and its heat resistance has been confirmed. ●Since it is a general-purpose type, please check the product size below and if it matches, it can be used for other products. ●Can also be used as a courtesy light for trucks. ●The delivery note will serve as your warranty card and will serve as a reference for future repeat orders, so please keep it in a safe place even after the warranty period has passed. How to install ★Please refer to your vehicle's owner's manual when installing. ★It is very hot right after your car's normal bulb turns off. Allow it to cool down sufficiently before working on it. ★Once you have confirmed the installation space, wiring, coupler, etc., turn off the power, remove the normal bulb, and install this product, but before doing so, please make sure that the light is on. At this time, please never touch the valve part of both the standard product and this product. And please install carefully. ★Finally, connect the wiring, clean the mounting glass surface, and secure it with double-sided tape. The top image is an image. Caution (Disclaimer) > Please read Please note that under no circumstances will we be able to bear the labor costs or any other expenses associated with installation.


Manufacturer: ‎Spiderlight Japan Co., Ltd.
Brand: ‎SPIDERLITE
Package size: ‎16.5 x 16.2 x 8.6 cm; 238 g
Product model number: ‎LBJSDS- 5
Valve shape: ‎S25
Number of bolts: ‎24 bolts
Certification: ‎Comes with a 3-month warranty under normal use. (Excluding damage and water damage) The delivery note serves as the warranty card, so please keep it in a safe place.
Product weight: ‎238 g