Specifications

Frequency Response (processing bypassed)

• Flat mode analog (I/O): 50Hz - 20kHz, ±0.25dB

• Flat mode (digital I/O): 20Hz - 20kHz, ±0.05dB

• FM mode: 50Hz - 15kHz, ±0.25dB; 75μs/50μs

Distortion (processing bypassed)

• Analog I/O: <0.02% THD (ref: +24dBu I/O)

• AES Digital I/O: <0.002% THD (ref: 0dBFS I/O)

Signal-to-Noise (processing bypassed)

• Analog I/O: >105dB (ref: +24dBu I/O)

• AES Digital I/O: 120dB (ref: 0dBFS I/O)

Separation

• Analog I/O: >100dB, 20Hz - 20kHz

• AES Digital I/O:  >140dB, 20Hz - 20kHz

Program Line Inputs

• Analog: active-balanced (XLR) accepts line levels from –15dBu to +15dBu; +24dBu clipping

• AES Digital: (XLR) accepts line levels between –30dBFS and 0dBFS at sampling rates from 32kHz to 96kHz

• IP Streaming: accepts all Icecast/SHOUTcast MP3, Ogg and AAC streams

Program Line Outputs

• Analog: active-balanced (XLR) delivers –12dBu to +18dBu for 100% modulation; +24dBu clipping, 200Ω source

• AES Digital: balanced (XLR) delivers –30dBFS to 0dBFS at 100% modulation; selectable sampling rates of 32kHz, 44.1kHz, 48kHz, 96kHz

• Characteristic: outputs may be set for flat orpre-emphasized response in FM mode.

Program Signal Latency (Delay)

1.5ms in bypass, 3ms analog I/O, 3.5ms digital I/O (typical)

Network Port

TCP/IP network connection (RJ45) for remote setup/operation and in/out audio streaming; full support for SNMP control

GPIO Ports

3 GPI, 3 GPO with assignable functions and logic polarity

Headphone Jack

Front-panel (TRS) 3.5mm

Internal Test Tone Generator

20Hz - 20kHz; variable frequency and level

Alarms

Local (GPIO) closures, browser interface, SNMP and SMS/email alarms for analog, digital and stream audio loss; maintains daily, weekly, monthly logs

Scheduler

Dayparting or ‘signature’ processing (e.g. talent microphone) is simplified with an onboard real-time clock and setup-preset programming.

Audio Processing

• AGC: ±15dB capture range; gated with dual-rate ‘windowed’ operation

• Leveling: variable ‘syllabic’ 2:1 compression

• EQ: 4-sections of parametric equalization

• Bass ‘Punch’: variable bass enhancement

• Compression: 3-bands with selectable crossovers, variable master and individual band drive controls, plus r.m.s./peak ‘density’ adjustment

• Final Peak Control: no-clip feed-forward wideband limiting with independent high frequency protection for FM mode

Power Requirement

12VDC at 280mA (2.1mm x 5.5mm coaxial); inline switchmode power supply included

Mounting Options

An optional rack adapter mounts one or two NOVIA or other Inovonics half-rack units in a standard 19-inch, 1U rack space

Size and Weight

1.6”H x 8”W x 6”D; 5 lbs shipping weight

NOTE: *ANALOG & DIGITAL I/Os ARE NOT AVAILABLE SIMULTANEOUSLY**

Download Product PDF