• Motorized unit crushes grapes and separates stems in one pass
• All parts that come into contact with the grapes are made from stainless steel
• Screw Feed provides fast, continual hands-free operation
• Self-adjusting rubber rollers are soft on grape stems to reduce tannin extraction
• 3,000 lbs per hour production capacity
• Made in Italy by EnoItalia

A great value in our motorized Crusher Destemmer line as the parts that are in direct contact with the grapes are stainless while the main body and motor/gear shroud are made from enamel coated steel. Performance is exactly the same as our WE223S Model.

The Crusher/Destemmer can be purchased by itself or alongside the Stainless Stand & Chute.

How These Work:
Grapes are loaded into the top bin where the powered screw feed continually pushes grapes towards the rollers. Grapes are gently crushed by the rubber rollers and then fall into the destemming chamber. The destemming chamber features a removable basket with a bunch of circular holes in it and rotating destemming shaft. Grapes fall through the holes into your bucket. Stems get rotated through the basket by the destemming shaft until they exit at the end of the machine where they fall onto the ground or an awaiting bucket.

Rubber Rollers
This model features soft rubber rollers which are softer on stems possibly reducing rough tannins in your wine. The rollers are spring loaded and self adjusting to protect against damage, such as the accidental passing of a small stone.

Output Production
Powered by a 1hp motor that provides an hourly production of approximately of up to 3,000 lbs. Note that these machines must be fed with consistency to reach maximum throughput. Overload the machine with too many grapes at one time and the motor will pause and actually slow down production.

Cleaning
Remove two quick bolts and the safety cover slides off and the internal stainless destemming grate slides out for easy cleaning. The hose out the rest of the unit. Comes with directions.

WE223PS Features:
1) 304-Type Stainless Steel Receiving Bin, Screw Feed, and Destemming Basket
2) A Screw Feed drive receiving bin for continual, faster, hands-free operation
3) Adjustabe Rubber Rollers (adjustment on all small machines, regardless of make, is limited to 5mm because of the way the gears mesh.)
4) Solid Construction
5) A powerful 110V 1HP motor which provides an hourly production of approximately 3000 lbs.
6) Replacement parts are available
7) Big, Red Emergency stop button on motor shuts down the machine in a hurry to help reduce chance of accident

Overall dimensions: 47" long x 19.6" wide x 25" high. Weight: 118 pounds (54KG.) Figure 158 lbs for shipping weight with pallet.