20% OFF shipping at www.midwoodautocraft.com on orders over $79 + up to 10% OFF products
www.midwoodautocraft.com
home > Fyne Audio F5E Standmount Speaker > Fyne Audio F5E Standmount Speaker
download picture
Fyne Audio F5E Standmount SpeakerFyne Audio F5E Standmount Speaker The F5E is the most affordable loudspeaker in the Fyne Audio range and the most accessible entry point into IsoFlare point source driver technology. It is a two way standmount built around a 125mm IsoFlare driver and a downfiring BassTrax Tractrix port. Sensitivity is 87dB, frequency response extends from 55Hz to 38kHz, and power handling is 3090W RMS. At 399. 98 per pair in Black Ash vinyl, the F5E is priced as an
Shopping security

Shopping security

Each payment you make on thelockerguy is secured with strict SSL encryption and PCI DSS data protection protocols

Fyne Audio F5E Standmount Speaker

The F5E is the most affordable loudspeaker in the Fyne Audio range — and the most accessible entry point into IsoFlare point-source driver technology. It is a two-way standmount built around a 125mm IsoFlare driver and a downfiring BassTrax Tractrix port. Sensitivity is 87dB, frequency response extends from 55Hz to 38kHz, and power handling is 30–90W RMS. At £399.98 per pair in Black Ash vinyl, the F5E is priced as an entry-level product. It is not the full SP experience — the cabinet is vinyl rather than gloss, the tweeter is titanium rather than magnesium, and the driver is smaller. What it is, honestly, is the most affordable way to hear what IsoFlare does and to decide whether it suits you before considering the larger models in the range.

IsoFlare Driver Technology

The IsoFlare driver is the central engineering decision in every Fyne Audio loudspeaker. It places the bass/midrange cone and the high-frequency compression tweeter on a shared axis — the tweeter fires from the centre of the cone — so both drivers radiate sound from a single point in space. This point-source behaviour means the time relationship between frequencies is consistent wherever you sit, and off-axis performance is substantially better than a conventional design where the tweeter sits above the bass/midrange unit.

In the F5E, the IsoFlare driver is a 125mm multi-fibre cone unit with a FyneFlute roll surround. The tweeter is a 19mm titanium dome compression driver. The crossover hands over at 1.8kHz.

BassTrax and Port System

The F5E uses a downfiring port with a BassTrax Tractrix diffuser built into the base of the cabinet. The Tractrix profile expands at a consistent angle as bass energy leaves the port, reducing reflections and smoothing bass integration into the room. For a standmount of this size, it makes the speaker less sensitive to stand height and floor-boundary effects than a conventional rear-ported design — useful when the speaker is being used in a variety of positions or room types.

Crossover

The crossover is a single-point design at 1.8kHz: 2nd order low-pass on the bass/midrange, 1st order high-pass on the tweeter.

Practical Uses

The F5E works well in smaller listening rooms where a floorstander would be disproportionate. It is also a natural choice for a desktop setup — the 125mm driver and BassTrax port give a more controlled low-frequency response than most speakers in this size category, and the 87dB sensitivity means it is easy to drive from integrated amplifiers at the modest power levels typical of a smaller system.

As a surround speaker in a larger home cinema system, the F5E is a sensible option: the IsoFlare driver gives consistent off-axis coverage, which is exactly what surrounds need. It pairs with the Fyne Audio F5E LCR centre channel for a matched entry-level cinema front stage.

Technical Specifications

System type 2-way, downward-firing port with BassTrax Tractrix diffuser
IsoFlare driver 125mm point-source, multi-fibre cone, FyneFlute surround
Tweeter 19mm titanium dome compression driver
Crossover frequency 1.8kHz
Crossover type 2nd order low-pass / 1st order high-pass
Frequency response 55Hz – 38kHz (−6dB typical in room)
Sensitivity 87dB (2.83V @ 1m)
Nominal impedance
Recommended amplifier power 30–90W RMS
Continuous power handling 45W RMS
Dimensions (H × W × D) 270 × 174 × 228mm
Weight 3.9kg each
Finish Black Ash vinyl
MPN F8000090

Who Is It For?

The F5E is for the buyer who wants to try IsoFlare technology at the lowest possible entry price — in a small room, on a desktop, or as surround speakers in a larger system. It is also for the buyer who wants to hear what distinguishes Fyne Audio's approach before deciding whether to invest in the F5S or one of the larger models in the range.

It will not deliver the bass weight or dynamic headroom of the SP models, and it should not be expected to. What it shares with them is the fundamental point-source driver architecture — and that is worth hearing at any price. The Fyne Audio Vintage Five is an alternative at a similar price for buyers drawn to a heritage aesthetic and a birch ply cabinet with a magnesium dome tweeter, and the F701SP is the natural step up for those who want the full SP series experience in a standmount.

Buying from Martins Hi-Fi

Martins Hi-Fi has been in Norwich since 1968. Elizabeth Gould runs the business today, and we stock only brands we have heard properly and stand behind. Dave and Chris can advise on whether the F5E suits your room and system, and how it compares with the larger models in the Fyne Audio range.

Contact us at [email protected], call 01603 627010, or WhatsApp on 07554 687137. You can read more about how we work on our Why Martins Hi-Fi page. We are at 85–91 Ber Street, Norwich, NR1 3EY.

Fyne Audio F5E Standmount Speaker

Item no : 57225187329
sold recently : Login >>
US$ 199.99
Pay in 4 interest-free payments of $50.00 Learn more
Min. order: 1piece

Shipping Estimate
USA
  • USA
  • CAN

Ships within 48 hours · Estimated delivery Jul 1 - Jul 6

Enjoy 20% off shipping

US$ 199.99

1-11

US$ 179.99

12-35

US$ 139.99

36-59

US$ 119.99

60+

US$40

Get now

Sign up to your membership to get coupons up to

15%

Get now

Opportunity to enjoy order discount up to 15% off

Please add the products
Shipping Notes
  • Free Standard Shipping on $100+ Orders to the USA.
  • Except Preorder products are shipped in 48 hours.
  • Delivery to the USA:
  1. Standard Shipping : 3-10 business days
  • If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
  • We offer a 30-day return/exchange service after receiving.
  • Final sale items are not eligible for returns or exchanges.
  • To process your return/exchange, please contact us at [email protected]
  • Please click here for more details>>> Return & Exchange Policy

Discover Niche Categories That Outsell

Top-Converting Item to Boost Your Average Order

recommand products

Related Searches