Full contact rear camber/rear toe adjustment shim Honda FWD: Fit (Including GK3/GK5/GP5 Hybrid/RS), Grace (GM4) 9 types, 2 each, 18 pieces in total Japanese installation manual included

Adjust the rear toe and rear camber of the Honda Fit's rear axle suspension. Ideal for countermeasures against excessive toe-in due to lowering, and rear suspension alignment settings for circuit driving. It can be easily adjusted by inserting a shim with the appropriate amount of change between the back plate and rear suspension axle beam. Adjust toe and camber by combining up to two pieces on each side. Compatible models Honda FWD: Fit (including GK3/GK5/GP5 Hybrid/RS), Grace (GM4) *Do not change toe by more than 0.50° and camber by 1.00°. Set contents 2 of each of the following 9 types of shims 71791: Rear toe variation ±0.10°71792: Rear toe variation ±0.20°71793: Rear toe variation ±0.30°71794: Rear toe variation ±0.40°71795: Rear toe variation ±0.50°71796 : Rear camber change ±0.25°71797: Rear camber change ±0.50°71798: Rear camber change ±0.75°71799: Rear camber change ±1.00° Precautions for use We cannot provide any support or answers regarding vehicle inspections. Please check with the relevant testing laboratory. Before starting work, be sure to check that the product is compatible with the vehicle, that there are no missing parts, and that the bolts that secure the hub bearing are the appropriate length. Check the torque of the relevant bolts every 50,000 km. Please also check the car manufacturer's maintenance manual. The desired values ​​may not be achieved due to dirt on the mounting surface, incorrect torque, assembly errors, and individual differences. This part must be installed at your own risk by someone with the necessary knowledge and skills, using appropriate and safe tools and equipment. Improper installation may result in loss of vehicle control, personal injury, or vehicle damage. We will not be held responsible for any injuries, accidents, breakdowns, replacement fees or restoration work in the event of a malfunction that occur during installation or use of this product. After installation, 4 wheel alignment/toe adjustment is required. Safety Warning We cannot provide any assistance or answers regarding vehicle inspections. Please check with the relevant testing laboratory. Before starting work, be sure to check that the product is compatible with the vehicle, that there are no missing parts, and that the bolts that secure the hub bearing are the appropriate length. Check the torque of the relevant bolts every 50,000 km. Please also check the car manufacturer's maintenance manual. The desired values ​​may not be achieved due to dirt on the mounting surface, incorrect torque, assembly errors, and individual differences. This part must be installed at your own risk by someone with the necessary knowledge and skills, using appropriate and safe tools and equipment. Improper installation may result in loss of vehicle control, personal injury, or vehicle damage. We will not be held responsible for any injuries, accidents, breakdowns, replacement fees or restoration work in the event of a malfunction that occur during installation or use of this product. After installation, 4 wheel alignment/toe adjustment is required. Read more


Manufacturer: ‎Specialty Products Company
Brand: ‎Specialty Products Company
Model name: 71790
Packing size: ‎23.6 x 18.1 x 5.8 cm; 519.99 g
Product model number: 71790
Original product number: 71790
Product weight: 520 g