Rust-Oleum Speed Screed – Rapid Floor Smoothing Compound

Rust-Oleum Speed Screed is a durable, low-odour floor repair compound designed to smooth uneven, worn or damaged concrete surfaces quickly and effectively. With a pourable consistency, it allows for easy application at thicknesses from 3–15 mm. It’s foot traffic-ready in just 6 hours, making it ideal for fast-turnaround projects in commercial and industrial settings.

Key Features:

• Extremely durable finish
• Ready for foot traffic in 6 hours
• High mechanical strength
• Low odour – ideal for indoor use
• 3–15 mm thickness range
• For levelling worn or uneven concrete floors

Surface Preparation

Concrete should be free of loose material, soft surface laitance and contaminants.
New concrete must be at least four weeks old. Remove all loose material by wire
brushing. General dirt etc., should be removed with a strong neutral cleaner. Oil and grease can be removed with ND14 Cleaner/Degreaser. Cracks in concrete should be raked out and all loose material removed.

Technical Data

Gloss Level: Matt
Compressive Strength: 29 MN/m²
Tensile Strength: 5.2 MN/m²
Flexural Strength: 7.7 MN/m²

Directions for Use

Priming: Two primers are supplied. Dampen areas of bare concrete with clean cold water
and leave for 20 - 30 minutes prior to applying Primer 1. Apply Primer 1 to the prepared
surface using a brush or soft broom. Apply the Primer evenly avoiding ‘ponding’ on the
surface and allow it to dry. Then apply Primer 2.
Mixing: (immediately after Primer 2 has been applied) Pour the resin into the empty Speed
Screed container. Add the powder to the liquid slowly and blend in using a slow speed
electric drill fitted with a paint stirrer until a completely even colour and consistency is
obtained (3 to 5 minutes).

Data Sheets

Rust-Oleum Speed Screed TDS