20% OFF shipping at www.midwoodautocraft.com on orders over $79 + up to 10% OFF products

Ship to:

/ English / USD

New Arrival

Air Freeshipping Best Sellers Nihao Choice

Sourcing

Shipping Calculation

home > Proflow Cylinder Heads, AirMax 200, Assembled Aluminium, Ford Cleveland , 2V 68cc Chamber, 205cc Intake Runner, Pair - PFEAHF20068-2V > Proflow Cylinder Heads, AirMax 200, Assembled Aluminium, Ford Cleveland , 2V 68cc Chamber, 205cc Intake Runner, Pair - PFEAHF20068-2V

Proflow Cylinder Heads, AirMax 200, Assembled Aluminium, Ford Cleveland , 2V 68cc Chamber, 205cc Intake Runner, Pair - PFEAHF20068-2V main image 0

Proflow Cylinder Heads, AirMax 200, Assembled Aluminium, Ford Cleveland , 2V 68cc Chamber, 205cc Intake Runner, Pair - PFEAHF20068-2V main image 1

download picture

description

Report this seller or product

Proflow Cylinder Heads, AirMax 200, Assembled Aluminium, Ford Cleveland , 2V 68cc Chamber, 205cc Intake Runner, Pair - PFEAHF20068-2VPart Number: PFEAHF20068 2V Proflow Cylinder Heads, AirMax 205, SB Ford 302, 351C, Assembled Proflow does not sacrifice quality for a low priceyou get both with our aluminium cylinder heads. The lightweight heads are cast from A 356 aluminium alloy with a large choice of Engine, for SB & BB Chevrolet, LS Chev Holden Ford SB 289 351W, 302,351 Cleveland 2V & 3V & BB FE, and Chrysler SB & BB, phosphorous bronze valve guides, and ductile iron valve seats

Shopping security

Each payment you make on thelockerguy is secured with strict SSL encryption and PCI DSS data protection protocols

product description

Why choose thelockerguy wholesale?

Part Number: PFEAHF20068-2V

Proflow Cylinder Heads, AirMax 205, SB Ford 302, 351C, Assembled

Proflow does not sacrifice quality for a low priceyou get both with our aluminium cylinder heads. The lightweight heads are cast from A-356 aluminium alloy with a large choice of Engine, for SB & BB Chevrolet, LS Chev Holden Ford SB 289-351W, 302,351 Cleveland 2V & 3V & BB FE, and Chrysler SB & BB, phosphorous bronze valve guides, and ductile iron valve seats for use with unleaded gas. They're also end-milled and drilled for accessories. The fully assembled heads have stainless steel valves, High Performance valve springs, 7 degree valve locks. Perfect for your Mild or High performance Hot Rod.

SPECIFICATIONS
Material:	356 Alloy, T6
Chamber Volume:	69cc
Intake Runner Volume:	207cc
Intake Port location:	OEM
Minimum Cross Section:	2.368 square inches (min)
Exhaust Runner Volume:	120cc - high velocity
Exhaust Port Location:	Raised .080'' (near stock location)
Valve sizes:	Intake 2.10" x 5.250" (45 degree seat, custom 5 angles blended) Exhaust 1.650'' x 5.050" (45 degree seat custom high velocity radius/blended)
Valve Guide Angles:	Canted Valve angles Intake 10.0 x 4.0 degrees Exhaust: 9.5 x 3.0 degrees
Valve Guides:	Bronze.502'' od x 11/32'' stems.570" shoulder
Valve Seat Inserts:	Intake: 2.250'' x 1.880 x 3/8 (Durabond 7000 series) Exhaust: 1.680'' x 1.430'' x 3/8
Spark Plugs:	relocated for efficient fast burn, ¾ reach, 5/8 hex, washer seat (NGKBCP7ES)
Spring Pads:	1.560'' OD / .560'' ID (1.190" Coil Bind)
Valve Spring Height:	1.960'' (with stock length valve)
Installed Height:	Int - 1.90" @ 125lbs Exh - 1.90" @ 128lbs
Spring Rate	229 lbs
Guide seal to retainer base	0.917"
Rocker Arm Type:	7/16'' stud mounted roller rockers (1.73 ratio)
Ext Water Port:	Heads have 3/4 npt tapped hole on each end which need to be plugged if not used
Head Bolts:	Accept oem length bolts or studs
Pushrods:	5/16'' or 3/8'' (check required length)
Rocker Arm Studs:	7/16'' unc

Proflow Cylinder Heads, AirMax 200, Assembled Aluminium, Ford Cleveland , 2V 68cc Chamber, 205cc Intake Runner, Pair - PFEAHF20068-2V

Name: Proflow Cylinder Heads, AirMax 200, Assembled Aluminium, Ford Cleveland , 2V 68cc Chamber, 205cc Intake Runner, Pair - PFEAHF20068-2V
Brand: www.midwoodautocraft.com
SKU: 62924082995
Price: 904.48 USD
Availability: InStock
Rating: 4.4257 (1980 reviews)