ND14 Cleaner/Degreaser – Concentrated, Non-Flammable Cleaning Solution

ND14 Cleaner/Degreaser is a powerful, concentrated alkaline cleaning solution formulated to remove grease, oil, proteins, dirt, and other contaminants from a wide range of surfaces, including coated, mineral, and metal substrates. Its non-flammable, low-odour formula makes it safe and pleasant to use in industrial and commercial environments.

This versatile cleaner can be diluted up to 1:20 depending on the level of contamination and is suitable for use as an additive in high-pressure cleaning systems. It can also be applied manually using a brush, mop, or broom, providing reliable, deep cleaning across large surface areas.

Key Features:

• Removes grease, oil, dirt, and protein residues

• Concentrated alkaline formula – dilutable up to 1:20

• Suitable for coated, mineral, and metal surfaces

• Can be used with high-pressure cleaning equipment

• Non-flammable and virtually odour-free

• Easy to apply with brush, mop, or broom

• Economical – cleans up to 100 m² per litre

Directions for Use

To ensure homogeneity shake well before use. Scrape or sweep away grease, oil, dirt,
mould and all other surface contaminations as much as possible. ND14 Cleaner/Degreaser
can be applied diluted or concentrated with a sponge, cloth, brush or broom. For normal
cleaning a 3 - 5% concentration will be sufficient. The product should be diluted with cold
water. After use rinse with plenty of fresh water. If a concentration of more than 5% is
used, hot water rinsing is absolutely necessary. As a high-pressure(steam)cleaning additive
a 2% concentration is recommended. After cleaning, remove any remaining water and
allow the surface to dry, as moisture left on the surface or entrapped into pores may cause
premature failure of the coating system. Large surface areas or poor drying conditions may require longer drying times before a coating system can be applied.

Data Sheets

Rust-Oleum ND14 Cleaner/Degrease TDS

Rust-Oleum ND14 Cleaner/Degrease MSDS