Seasoned creators can keep their filament dry and ready for printing with the Creality Space Filament Dryer. Featuring an enclosed chamber that can store a single spool of material, the Space filament dryer reduces humidity and keeps the filament dry which reduces stringing, clogging, layer shifting, and more. Equipped with 360° PTC hot-air heating, your filament is dried off from all angles, providing even drying around the entire spool. LCD touch controls enable you to set various parameters such as the temperature range from 113 to 158F as well as enable the 48-hour timer and monitor the humidity level in real time.

The Space filament dryer is compatible with PLA, TPU, PP, ABS, ASA, PETG, PC, PA, PET, PLA-CF, PETG-CF, and PA-CF materials with a 1.75 and 2.85mm diameter. Space PI X4 is a dual chamber for four filament spool capacity. Wide Compatiblity for 1KG or 2KG spools.

Features include:

200W + 200W PTC Heats Up to 85°C - Ideal for Engineering Filaments
The dual 200W PTC heaters, paired with insulated chambers, significantly improve heating efficiency, allowing temperatures to reach up to 85°C. This ensures continuous and effective drying of engineering filaments such as PA, PAHT, PC.

Why Do You Need a SpacePi X4?
Moisture ruins filaments, may causing defects like stringing, clogging, layer shifting and poor adhesion. SpacePi removes humidity, restoring filaments to their optimal state for smooth, high-quality prints. The temperature inside the X4 can reach up to 85°C, which can save you nearly 50% of the time when drying engineering filaments such as PA-CF, PAHT, PPA.

Dual Chambers: Independent Temperature Control
Each chamber is equipped with an independent PTC heater, allowing simultaneous drying of two filament types at different temperatures in one machine.

Flexible and Energy-Efficient Drying
You can choose between single or dual chamber modes for energy-efficient drying. Single-chamber operation saves up to 40% energy, it's eco-friendly and cost-effective.

SpaceDry 4.0™: One-stop Drying Solution
The SpaceDry 4.0™ achieves the perfect balance between efficient dehumidification and energy-saving drying. Its dual-chamber design significantly reduces energy consumption while integrating efficient heating, desiccant regeneration, and active dehumidification to improve drying/storage capabilities. Offering a one-stop intelligent drying experience, SpaceDry 4.0™ sets a new benchmark in drying technology.

360° Hot Air Circulation
The 360° surrounding hot air circulation ensures efficient heating and consistent temperature, allowing for uniform drying of filaments inside the chamber.

Desiccant Regeneration
The desiccant chamber connects to the heating airflow, regenerating the desiccant automatically with each use. No replacement needed, providing a hassle-free and efficient drying process.

Active Dehumidification
Dual dehumidifying fans actively expel moisture during drying, no manual dehumidification.

One-Way Valve Design
Ensure air tightness after drying to avoid moisture.

Smarter Drying, Elevated Printing Experience
First drying scene touch UI. With a 3.2" touch screen offers a smoother, more intuitive interaction.

Humanized Intelligent Functions

• Active Silent: Once the target temperature is reached, the drying fan speed automatically reduces, operating quietly without disturbing your peace.
• Drying Ends with a Beep: You will know when drying is complete.
• Supplementary Light: You can choose to turn it on manually or set it to automatic mode. In automatic mode, the light will turn on automatically when drying starts and turn off when drying ends.

Triple Safety Protection
Intelligent self-checking for early detection of issues, ensuring safe and worry-free drying.

Wide Compatibility
Large size for 1kg/2kg spools. Works perfectly with all standard filament diameters 1.75/2.85mm.

• Housing Material: ABS/PA/PC
• Dimensions: 382*290*270mm
• Flame Retardant Grade: UL 94 V-0
• Temperature Range: 45-85℃
• Net Weight: 5kg (11 Pounds Approximate)
• Drying Time: 1-48h
• Rated power: 360W
• Input Voltage: UK/GB/EUR/AUS/BRA/CHL/ARG 220-240V~50/60Hz US/JPN 100-120V~50/60Hz
• Applicable Filament: Spool Diameter ≤ 200mm, width ≤ 150mm, wire diameter:1.75/2.85mm