Shopping security
Under hard driving, the stock oil cooler is easily overwhelmed. Failures start to occur when oil cannot dissipate its collected heat fast enough and the oil begins to thin and degrade - losing its lubrication properties.
The MMR Oil Cooler Kit solves this problem: by adding in an additional air to oil cooler positioned right in the airflow in the front of the car, oil temperatures are reduced by around 15 - 20 degrees centigrade (of course dependant on how the car is being used, ambient temps and state of tune). The core itself has a 77cm width, and 6.5cm depth.
The MMR Performance E9x M3 Oil Cooler will fit in the same location as the factory cooler, making it compatible with any surrounding modifications in which the factory cooler still fits.
Whether you have a supercharger or you are simply looking to add reliability with vastly improved oil cooling to your factory-spec M3, this oil cooler will help keep your oil temperatures in check, whether in demanding, on-track conditions or sitting in traffic.
Core Dimensions: Width 77cm Height 11.5cm Depth 6.5cm

| Series | Model Code | Year | Variant | Engine Codes |
| 3 Series | E90/E92/E93 |
2006 - 2013 |
M3 |
S65 |
FITMENT NOTE:
For cars built around and prior to 03/2008 you may need to upgrade your oil lines. BMW superseded oil lines on early vehicles and they are physically different. The MMR oil cooler is designed for vehicles with the later spec lines. These oil lines are available direct from your local BMW dealer.
Early Cars - with these part numbers below, will need to be updated to the later revised versions:
To check, you can use www.realoem.com with your VIN to see which oil lines your vehicles may have.
Ships within 48 hours · Estimated delivery Jun 21 - Jun 26
US$40
Get nowSign up to your membership to get coupons up to
15%
Get nowOpportunity to enjoy order discount up to 15% off
Top-Converting Item to Boost Your Average Order