Optimize your vertical networking installations with our high-performance CAT6A Shielded Riser-Rated Ethernet Cable, designed for interference-heavy environments and reliable 10GBASE-T speeds up to 100 meters. Featuring F/UTP foil shielding with drain wire, heavy-duty 23 AWG solid bare copper conductors, and a flame-retardant, UL-listed CMR jacket, this riser-rated Cat6A cable ensures EMI protection, fire safety compliance, and seamless data integrity for in-wall and riser shaft runs in commercial buildings that require both 10 Gigabit performance and interference immunity.

Engineered for the most demanding vertical installations, this ultra-premium cable combines three exceptional features rarely found together: CMR fire rating for vertical runs, foil shielding for EMI/RFI protection, and heavy-duty 23AWG conductors for superior 10G performance. The thicker 23AWG gauge offers lower resistance than standard 24AWG, enabling extended PoE++ reach and better signal quality over long vertical runs, while the foil shield blocks interference in electrically noisy riser shafts. Exceeding ANSI/TIA-568.2-D standards with 750MHz bandwidth and UL certification, it's the ultimate solution for multi-story buildings requiring fire-safe 10 Gigabit vertical distribution with maximum EMI immunity.

Key Features

• Full foil shield (F/UTP) blocks EMI/RFI interference in electrically noisy environments
• Overall, aluminum foil encases all four pairs for comprehensive protection
• Tinned-copper drain wire provides proper grounding for superior data integrity
• Heavy-duty 23 AWG solid bare copper conductors (thicker than standard 24AWG)
• Lower resistance for extended PoE++ reach and cooler operation
• Minimal signal attenuation over long vertical runs
• Optimized for 10GBASE-T performance over a full 100-meter distance
• UL-listed CMR (Communications Riser) rated for vertical installations
• Flame-retardant PVC jacket complies with CMR/CL2R fire codes
• Approved for safe runs between floors in non-plenum environments
• 750MHz bandwidth exceeds ANSI/TIA-568.2-D standards for CAT6A
• Supports 10GBASE-T (10 Gigabit Ethernet) up to 100 meters
• PoE++ (IEEE 802.3bt) compatible with extended reach, thanks to 23AWG
• Backward compatible with CAT6, CAT5e networks
• Perfect for hospitals, factories, and crowded telecom closets
• Sequential foot markers for accurate measurements
• Rugged 1000ft spool for tangle-free vertical pulls
• Future-proof high-speed performance
• Outperforms copper-clad aluminum (CCA) alternatives

Ideal Applications

• Riser backbones in multi-story offices, schools, and hospitals
• Vertical 10G distribution between floors
• Floor-to-floor runs in commercial high-rise buildings
• Riser shaft installations with EMI concerns
• In-wall installations requiring a CMR rating and shielding
• Wi-Fi 6/6E access point installations with PoE++
• PoE++ security cameras in multi-story buildings
• VoIP phone systems require a 10G backbone
• High-speed data links in vertical riser shafts
• Medical facilities with sensitive equipment and vertical runs
• Manufacturing buildings with machinery interference
• Any vertical installation requiring both CMR rating and EMI protection
• Buildings with 10G backbone requirements and electrical interference

Cable Type & Construction

• Standard: CAT6A
• Type: Riser-Rated (CMR), Shielded
• Shielding Type: F/UTP (Foil/Unshielded Twisted Pair)
• Shield Material: Overall aluminum foil (encases all four pairs)
• Pairs: 4 twisted pairs with enhanced specifications
• Total Conductors: 8
• Installation: Vertical riser shafts, floor-to-floor, in-wall (non-plenum)

Conductors

• Gauge: 23 AWG (heavy-duty, thicker than standard 24AWG)
• Material: Solid bare copper
• Configuration: Solid (permanent installation)
• Performance: Lower resistance, extended PoE++ reach, minimal attenuation
• Advantage: Superior 10G performance over long vertical runs compared to 24AWG

Shielding

• Shield: Full foil shield around all pairs
• Drain Wire: Yes (tinned copper)

Insulation

• Material: High-density polyethylene (HDPE)
• Performance: Enhanced specifications for CAT6A, superior signal integrity

Performance

• Maximum Frequency: 750MHz (CAT6A standard)
• Data Rate: 10GBASE-T (10 Gigabit Ethernet) up to 100 meters
• Applications: 10GbE, Gigabit Ethernet (1000BASE-T), Fast Ethernet, 155Mbps TP-PMD/CDDI
• PoE Compatible: Yes - PoE++ (IEEE 802.3bt) with extended reach due to 23AWG
• Attenuation: Minimized with heavy-duty 23AWG conductors
• Signal Integrity: Enhanced by shielding in noisy vertical environments
• Future-Proof: Supports current and future 10G applications

Jacket

• Material: CMR-rated PVC (flame-retardant)
• Fire Rating: CMR (Communications Riser) / CL2R
• Compliance: UL-CMR/CL2R fire codes
• Outer Diameter: 7.4mm ± 0.5mm
• Marking: Sequential foot markers
• Safety: Approved for vertical runs between floors
• Durability: Long-lasting in riser environments

Installation Rating

• Indoor Rated: Yes (CMR)
• Outdoor Rated: No
• Suitable Areas: Riser shafts, vertical runs, floor-to-floor, in-wall (non-plenum)
• Environment: Non-plenum indoor vertical installations with EMI concerns
• Fire Safety: Flame-retardant for code-compliant vertical runs
• Special Use: High-interference environments requiring 10G and shielding

Design Advantages

• Triple Premium Features: CMR rating + foil shielding + 23AWG (rare combination)
• 23AWG Advantage: Lower resistance than 24AWG for superior 10G performance
• CMR Rating: Fire-safe for vertical installations between floors
• Shielding: EMI/RFI protection in electrically noisy vertical shafts
• 10G Optimized: Full 10GBASE-T performance to 100 meters
• PoE++ Enhanced: Better power delivery over extended vertical distances
• Signal Quality: Minimal attenuation and interference in long riser runs
• Compliance: Meets building codes for riser installations
• Future-Proof: Ready for next-generation 10G applications

Use Case Considerations

• Primary Use: Vertical 10G installations requiring both fire safety and EMI protection
• Advantage: Ultra-rare combination of CMR + shielded + 23AWG for CAT6A
• Best For: Multi-story buildings with a 10G backbone and EMI concerns
• Rare Combination: Most CAT6A riser cables are unshielded
• Premium Solution: For critical infrastructure and demanding vertical installations

Packaging

• Spool Size: 1000ft rugged reel
• Design: Tangle-free for smooth vertical pulls

Compliance & Certifications

• Certification: UL Listed
• Standards: ANSI/TIA-568.2-D (CAT6A)
• Fire Rating: CMR (Communications Riser) / CL2R
• Quality: UL-verified for reliability and safety