Part Number: PFEID1281

Proflow /  Pertronix style electronic ignition conversion kit will fit all Autolite single point distributors typically fitted to all 60's and early 70's Fords. Ford stopped using the name Autolite in 1972 and introduced Motorcraft. as a brand name.

This kit is an all-inside distributor kit and is ideal to use for the customer who wants to upgrade to a stronger spark with no maintenance while retaining the original distributor and factory look. This kit is also compatible to use with your original Yellow top coil. If you want to increase the spark energy further, use the Pertronix Flame thrower coil, part number SDR-IGN-40011.

Note: Designed to use points type coil with a minimum of 1.5ohms primary resistance. Failure to use the correct coil will damage the unit and void warranty.

• Delivers twice the voltage to the spark plugs, increasing horsepower, fuel economy, and spark plug life.
• 2:1 improvement over "points" in current fall time for increased coil output.
• Rotating cobalt magnets trigger a Hall Effect integrated circuit....no points to burn...no moving parts to wear out.
• Epoxy molding makes our module impervious to dirt, oil, grease and moisture.
• Stable timing - no need for any adjustments.
• Will suit Autolite Distributor and USA made Motorcraft ( indentified by the use of 2 screws holding the points down )
• NOTE:  Will NOT suit Australian Motorcraft distributor which was made by Bosch and has 1 screw holding points down