Designed to work with all pedal boxes and balance bars, the new patent pending Monit Brake bias Dial allows drivers to easily view, and adjust, the position that their brake bias is set too. Reset the display to ‘zero’ at their preferred position and confidently adjust for changing conditions to get maximum braking performance, knowing they can accurately return to their starting point if they need to.

The Monit Brake Dial is a remote brake bias adjuster that has an in-built LCD display that displays the position setting of the vehicles brake bias.

As per current brake bias adjusters, the Monit Brake Dial has detent ‘clicks’ every ¼ turn. The LCD display stays on constantly and shows the number of detent clicks that the Monit Dial has turned from the drivers preferred ‘zero’ point. To set the preferred ‘zero’ point the driver simply presses and holds a button.

The new Monit Brake Dial gives all drivers the confidence and control to adjust their brake bias accurately to gain optimal performance.

Existing brake remote adjusters have 40 – 80 ‘clicks’ of adjustment and it is very hard for the driver to remember where the brakes are set at. The Monit Brake Dial solves this problem by giving the driver the ability to set the brake bias remote adjuster quickly and accurately to a known position and enables them to view that position at a glance. This gives the driver the confidence to adjust their brake bias to changing conditions – with the knowledge that they can accurately return to their starting position at any time.

The Monit Brake Dial comes complete with mounting fasteners, a flexible shaft, and both 7/16” and 3/8” balance bar threaded adaptors.

It is designed to fit to ALL existing balance bars and pedal boxes on the market. This includes pedal boxes and balance bars from AP Racing, Tilton, Wilwood, Alcon, OBP, Compbrake, Brembo, etc etc.

Installation on new and existing balance bars, and pedal boxes, is simple and easy as the size is similar to existing remote adjuster products. Additionally, the Monit Brake Dial is water resistant and requires no wiring. It has a replaceable, easily available, coin cell battery that lasts 18months with the screen staying on constantly during that time. There is also a low battery warning indicator.

Square Mount – Square mounting plate. The same size and mounting pattern as several existing brake remote adjusters.