CALL SHANON AT 507 445 3235 WITH ANY QUESTIONS.

The BRODIX Track 1® has a 221 cc intake port and a 67 cc combustion chamber. This head was designed for the drag or oval track racer who wants a lighter weight cylinder head that can make a significant difference in horsepower. The BRODIX Track 1 ® has a very thick deck that is compatible with nitrous, and comes with phosphorous bronze valve guides and hardened valve seats installed for unleaded fuel. *The spring pockets must not be cut any larger or deeper than 1.550. The BRODIX Track 1X was designed as the next step above the Track 1. An additional 20 to 25 horsepower may be gained with this head out of the box over the traditional Track 1. BRODIX has incorporated improvements such as a 40/60 valve spacing, CNC machined combustion chambers, 2.100 intake valves, and new intake and exhaust ports. The 222 cc intake port flows over 285 cfm at 700 lift. The exhaust port flows over 195 cfm at 700 lift. *Track 1X requires a T&D Economy or Jesel shaft system.
The BRODIX Track 1® is also available completely CNC ported at an economical price. CNC porting ensures maximum consistency between each intake and exhaust port. No special components are required with the CNC ported BRODIX Track 1® head. This head is available in three intake port volumes. Exhaust ports accommodate a standard Chevy pattern only. The industry standard has been taken to the next level with modernized CNC porting. Optional LT1 Modifications Available.

Package Heads:

• PS CB: VALVE BOWLS BLENDED • PS MI: MATCH INTAKE PORT TO FP 1206 • PS Valve Job: COMPETITION VALVE JOB • Intake Valves: 2.080 X 4.965 o.a.l. - BR 81019 (TRACK 1, STS T1 215,
KC T1 227) 2.100 X 4.965 o.a.l. - BR 81011 (TRACK 1X) 2.125 X 5.065 o.a.l. - BR 60025 (STS T1 233) • Exhaust Valves: 1.600 X 4.965 o.a.l. - BR 81021 (TRACK 1, STS T1 215, KC T1 227)
1.600 X 5.065 o.a.l. - BR 60030 (STS T1 233) • Valve Springs: 1.550 ROLLER VALVE SPRING - GA 1000, 240 lb CLOSED, 550 lb OPEN, 1.950 INSTALLED HEIGHT, .700 MAXIMUM LIFT
• Retainers: 1.550 10° STEEL - CC 752 (TRACK 1) 1.550 10° TITANIUM - MA 2398BR (TRACK 1X, CNC TRACK 1) • Valve Locks: 10° JUMBO - CC 611 • Rocker Studs: 7/16 - BR 716L, AR RRS-4I • Guide Plates: 5/16 - CC 4808 (TRACK 1, STS T1 215, KC T1 2275/16 - BR 5160 (STS T1 233)• Valve Seals: 11/32 - US VS529V

FACTS AND RELATED COMPONENTS:

• Torque Heads: 70 ft-lb • Torque Rocker Studs: 40-45 ft-lb • Intake Gaskets: FEL-PRO 1206, COMETIC C5414 • Head Gaskets: 350 - FEL-PRO 1003, COMETIC C5399 400 - FEL-PRO 1004, COMETIC C5403 • Exhaust Gaskets: FEL-PRO 1406, COMETIC C5415 • Head Bolts: ARP 134-3601, MANLEY 42313 • Head Bolt Washers: MANLEY 42102 • Head Studs: ARP 234-4301(12 pt)
• Accessory Bolt Holes Are Drilled • Spark Plug Starting Points: NGK R5671A-9 FOR ALCOHOL NGK R5671A-8 FOR RACING GAS • Spring Pockets: MAY NOT BE CUT ANY LARGER OR DEEPER THAN 1.550 • Valve Angle: 23° • Angle Milling: .0078 in PER cc • Flat Milling: .0060 in PER cc • Angle Machining: NOT AVAILABLE • Dowel Shift: NOT AVAILABLE • Pushrod Slots: STANDARD (TRACK 1, STS T1 215, KC T1 227) 40/60 (TRACK 1X, STS T1 233)) • Stud Girdle: BR 6435 (TRACK 1, STS T1 215, KC T1 227) N/A (TRACK 1X) BR 6440 (STS T1 233) • Rocker Arms: STANDARD (TRACK 1, CNC TRACK 1)  T&D ECONOMY OR JESEL SHAFT SYSTEM (TRACK 1, STS T1 215, KC T1 227) - T&D 2256, JESEL KPS 01001 T&D ECONOMY 40/60 OR JESEL 40/60 SHAFT SYSTEM (TRACK 1X, STS T1 233) - T&D 2256, JESEL KPS 01302• Lifters: STANDARD

Cylinder Head Specifications:

                     INTAKE CHAMBER VALVE SIZES      PLUG          EXHAUST           VALVE                                     INTAKE

                      PORT    VOLUME      INT./EXH.        ANGLE         PATTERN     CENTERLINE                             MANIFOLD

 TRACK 1    221 cc       67 cc       2.080/1.600        Angle         Standard          Standard          HV 1000 / HV 1002 / SE 100 / SE 102
TRACK 1X  222 cc       68 cc       2.100/1.600        Angle         Standard             40/60                               HV 1000 Series
STS T1 215  215 cc       68 cc       2.080/1.600        Angle          Standard          Standard          HV 1000 / HV 1002 / SE 100 / SE 102
KC T1 227   227 cc       68 cc       2.080/1.600        Angle          Standard          Standard          HV 1000 / HV 1002 / SE 100 / SE 102
STS T1 233  233 cc       68 cc       2.125/1.600        Angle          Standard             40/60             HV 1000 / HV 1002 / SE 100 / SE 102

         CUBIC INCH COMPRESSION     CAMSHAFT              RPM                        APPLICATION

TRACK 1   350 - 406       11.5 Minimum          Flat Tappet / Roller         3500 - 7000         Oval Track / Drag Race / Pro Street 
TRACK 1X    350 - 430       11.5 Minimum          Flat Tappet / Roller         3500 - 7000       Oval Track / Bracket Race / Pro Street
STS T1 215    350 - 406       11.5 Minimum          Flat Tappet / Roller          3500 - 7000         Oval Track / Drag Race / Pro Street
KC T1 227     383 - 430       12.5 Minimum                      Roller                    4000 - 7500                     Oval Track / Drag Race
STS T1 233  383 - 430       12.5 Minimum                      Roller                    4000 - 7500                     Oval Track / Drag Race

                           VALVE SIZE    0.200          0.300         0.400         0.500         0.600        0.650         0.700

TRACK 1          2.080 INTAKE      124             179            228            264            276           278            279
                         1.600 EXHAUST  103             138            164            178            186           188            190
TRACK 1X        2.100 INTAKE     152              213            262            285            287           290            292
                         1.600 EXHAUST  113             152            173            185            192           194            195
STS T1215      2.080 INTAKE      150              213            258            285            303           305            305
(CNC Ported)   1.600 EXHAUST  116             150            185             208            219           224            227
KC T1 227       2.080 INTAKE      154              223            270            303            312           314            316
(CNC Ported)  1.600 EXHAUST   116             150            185             208            219           224            227
STS T1 233     2.125 INTAKE      139              200            254            296            319           325            326
(50 Valve Job)

(CNC Ported)  1.600 EXHAUST  106              145             181            209            224           228            233

(45 valve Job)

Basic easy order numbers:

• T1 STD Bare Angle 1000000 221/67cc MAKE OFFER PER 2

• T1 STD Bare Straight 1000001 221/67cc MAKE OFFER PER 2

• Free shipping 48 states

• Layaway terms available

• No one sells BRODIX for less.

• We handle the complete BRODIX line.

• We are open from 9:00 AM to 10:00 PM.

CONTACT US THE PRICE IS NEGOTIABLE BEST OFFER

After purchasing, pay instantly with your credit card through PayPal!