Notifier NFW-50X Intelligent Addressable Fire Alarm Control Panel with Communicator.

The NFW-50X Notifier is the latest intelligent addressable fire alarm control panel (FACP) within the FireWarden Series and is a direct replacement for the FireWarden-50 (NFW-50). The NFW-50X comes with a pre-installed communicator and supports up to 50 addressable devices in any combination of detectors or modules. With an extensive list of powerful features, the NFW-50X programs just like FireWarden-100 products, yet fits into applications previously served only by conventional panels. Remote and local programming of the control panel is possible using the FS-Tools Upload/Download utility. Programming databases can be uploaded/downloaded via the panel’s USB port (and USB cable) or via an ethernet connection using the IPOTS-COM communicator. The USB port also allows for the download or upload of the entire program, history file, walk-test data, current status and system voltages by means of a USB flash drive.

Additional information

Features

• Listed to UL Standard 864, 10th edition.
• Pre-installed IPOTS-COM Ethernet IP and POTS (Plain Old Telephone Service) Central Station Communicator.
• Optional CELL-MOD or CELL-CAB-N GSM Central Station Communicator over AlarmNet®.
• Compatible with SWIFT® wireless devices.
• Auto-programming (learn mode) reduces installation time. Reports two devices set to the same address.
• Two independently programmable, built-in Style Z (Class A) or Style Y (Class B) NAC circuits.
• Selectable strobe synchronization for System Sensor, Wheelock, and Gentex devices.
• Notification Appliance Circuit End of Line resistor matching.
• Four programmable function keys for ease of maintenance.
• Two programmable relays and one fixed trouble relay.
• Built-in Programmer.
• Integral 80-character LCD display with backlighting.
• Real-time clock/calendar with automatic daylight savings control.
• History file with 1,000 event capacity.
• Addressable sounder base.
• Control module delay timer.
• Automatic detector sensitivity testing (NFPA 72 compliant).
• Automatic device type-code verification.
• Point trouble identification.
• Waterflow selection per module point.
• Alarm verification selection per detector point.
• Maintenance alert warns when smoke detector dust accumulation is excessive.
• One-person audible or silent walktest with walktest log & printout.
• System alarm verification selection per detector point.
• PAS (Positive Alarm Sequence) and Pre-signal per point (NFPA 72 compliant).
• Up to 16 ANN-BUS annunciators- 8 per each ANN-Bus.
• Remote Acknowledge, Alarm Silence, Reset and Drill via addressable modules or remote annunciator.
• Upload/Download of program and data via USB with optional FSTools Programming Utility.

Open Datasheet