Oliver 6910 Oscillating Spindle Sander

Built for Long, Steady Curve Work

The 6910 gives professional shops the stability, capacity, and duty cycle needed for controlled shaping across a wide range of curves and profiles.

Large Cast Iron Table for Confident Support

The 25-1/4 by 27-1/4 inch cast iron table holds parts steady so you can guide the work without fighting vibration. Its 45-degree tilt and corner cutout improve access and positioning on complex shapes.

Oil-Bath Oscillation for Cooler, Cleaner Cutting

The oscillation system runs in a sealed oil bath for long life and smooth motion. With 1-1/2 inches of travel and 75 strokes per minute, the spindle stays cooler and leaves a cleaner surface with less burning.

Ten Spindles for Wide Range Shaping

The 6910 includes ten spindle sizes from 1/4 inch up to 4 inches in diameter, giving you control over tight inside curves and broad sweeping arcs. Quick-change threaded spindles keep setup simple during busy shop days.

Heavy Cabinet and Industrial Controls

The welded steel cabinet adds mass for stability and provides built-in storage for spindles and inserts. Industrial push-button controls sit at a comfortable height for quick, safe operation throughout the day.

What’s Included

What’s Included? Oliver 6910

• Oliver 6910 Oscillating Spindle Sander — Floor-standing unit with cast iron table and oil-bath oscillation system built for heavy shaping work.
• Ten Spindles — 1/4", 3/8", 1/2", 5/8", 3/4", 1", 1-1/2", 2", 3", and 4" diameters for tight curves and wide profiles.
• Three Table Inserts — Matches spindle choices and keeps the table opening tight for cleaner support.
• Built-In Storage — Holds spindles and inserts for quick access during busy production days.
• 4" Dust Port — Connects to shop dust collection for cleaner operation and better visibility.

Specs

Oliver 6910 Specifications

• Model Number: 6910
• Stock Number: 6910.003
• Table Material: Cast Iron
• Table Size: 25-1/4" × 27-1/4"
• Table Tilt: 0° to 45°
• Table Height: 42-1/2"
• Number of Table Inserts: 3
• Spindle Speed: 1,720 RPM
• Oscillation Travel: 1-1/2"
• Oscillation Lubrication: 90-weight gear oil
• Dust Port: 4"
• Included Spindles: 1/4" × 5", 3/8" × 6", 1/2" × 6", 5/8" × 6", 3/4" × 9", 1" × 9", 1-1/2" × 9", 2" × 9", 3" × 9", 4" × 9"
• Footprint: 19-1/2" L × 18-1/2" W
• Motor: 2HP, 115/230V, prewired 115V plug (6/8 Amp)
• Overall Dimensions: 25-1/4" × 27-1/4" × 50"
• Net Weight: 295 lbs
• Gross Weight: 320 lbs