The IFP-2100 (red) and IFP-2100B (black) are intelligent analog/ addressable Fire Alarm Control Panels (FACP). The basic IFP-2100 panel contains one built in signaling line circuit (SLC), which can support 159 IDP/SK sensors and 159 IDP/SK modules or 127 SD devices per loop. Additional SLC loops can be added using the model 6815 SLC expander for System Sensor devices to increase the overall point capacity to 2100 or model 5815XL for Hochiki devices to increase the overall point capacity to a maximum to 2032 points per panel.

IFP-2100 has the interconnection capability for up to 32 panels. The system has two modes of operation, multiple panels covering one larger building, or multiple independent buildings. The RFP-2100 (red) or RFP- 2100B (black) can be used in a networked system where at least one IFP-2100 is in the system. It is the same as the IFP-2100 without the display.

IFP-2100 has eight on-board Flexput circuits that can be configured for auxiliary power, notification outputs, or for conventional smoke detector inputs (Class A or Class B). The FACP also has a Built in dual phone line digital alarm communicator/transmitter (DACT), IP or optional cellular technologies, Form C trouble relay, and two programmable Form C relays. IFP-2100 has powerful features such as detector sensitivity, day/night thresholds, drift compensation, pre-trouble maintenance alert, and calibration trouble alert.

The IFP-2100 supports a variety of devices, including RA-2000, RA-1000 or RA-100 remote annunciator, 5824 serial/ parallel printer interface module (for printing system reports), RPS-1000 power module, and IDP, SK or SD devices.

Specifications

Features

• RFP-2100 or RFP-2100B can be used in a networked system where at lease one IFP-2100 is in the system
• Network support for up to 32 Sites
• Built-in support for up to 159 IDP/SK detectors and 159 IDP/SK modules or 127 SD SLC devices
• Four line LCD display with 40 characters per line
• Available in a red or black cabinet
• IFP-2100 or RFP-2100 can be surface or flush mounted
• Four programmable function keys
• Network card allows copper network connection with a multi-mode or single-mode fiber connection option
• Built-in dual phone line, digital alarm communicator/ transmitter (DACT), IP or optional cellular technologies
• JumpStart AutoProgramming® feature for easy programming
• Renewable license on downloading software helps inhibit unauthorized programming
• Firmware can be upgraded in the field
• Supports up to four SWIFT wireless gateways. Each gateway can have up to 49 wireless devices
• Supports Class B (Style 4) and Class A (Style 6 or Style 7 configuration for SLC, and SBUS.
• Built in USB interface for programming

Open Datasheet