N-ANN-80-W NOTIFIER White 80-Character Serial LCD Annunciator

The N-ANN-80 annunciator is a compact, backlit, 80-character LCD fire annunciator that mimics the Fire Alarm Control Panel (FACP) display. It provides system status indicators for AC Power, Alarm, Trouble, Supervisory, and Alarm Silenced conditions. The N-ANN80 and the FACP communicate over a two-wire serial interface employing the ANN-Bus communication format. Connected devices are powered, via two additional wires, by either the host FACP or a remote UL-listed, filtered power supply. The N-ANN-80 is black; for white order N-ANN-80-W.

Specifications

Features

• Backlit 80-character LCD display (20 characters x 4 lines)
• Mimics all display information from the host panel
• Control switches for System Acknowledge, Signal Silence, Drill, and Reset
• Control switches can be independently enabled or disabled at the FACP
• Keyswitch enables/disables control switches and mechanically locks annunciator enclosure
• Keyswitch can be enabled or disabled at the FACP
• Enclosure supervised for tamper
• System status LEDs for AC Power, Alarm, Trouble, Supervisory, and Alarm Silence
• Local sounder can be enabled or disabled at the FACP
• N-ANN-80 connects to the ANN-Bus terminal on the FACP and requires minimal panel programming
• Displays device type identifiers, individual point alarm, trouble, supervisory, zone, and custom alpha labels
• Time-and date display field
• Surface mount directly to wall or to single, double, or 4? square electrical box
• Semi-flush mount to single, double, or 4? square electrical box. Use ANN-SB80KIT for angled view mounting
• Can be remotely located up to 6,000 feet (1,800 m) from the panel
• Backlight turns off during AC loss to conserve battery power but will turn back on if an alarm condition occurs
• May be powered by 24 VDC from the host FACP or by remote power supply (requires 24 VDC)
• Up to eight N-ANN-80s can be connected on the ANN-Bus

Open Datasheet