Efficiently monitor and receive notifications with the UDACT-300A MIRCOM Digital Alarm Communicator. With the ability to transmit common alarms and supervisory and trouble signals, this module requires only two telephone lines. Plus, its configurable design allows for set-up using either SIA or Ademco Contact ID protocols.

"Experience seamless alarm communication with the UDACT-300A Digital Alarm Communicator Transmitter/Dialer Module. Designed to work in harmony with Mircom's FA-1000, FX-2000, or FleX-Net Series Fire Alarm Control Panels, this advanced module transmits critical alarm, supervisory, and trouble information to monitoring facilities with ease. With its user-friendly programming options, flexible reporting protocols, and robust features like ZDACT zone grouping, the UDACT-300A is the perfect solution for reliable and efficient alarm communication."

Specifications:

Features:

• Communicates with Mircom’s FA-1000, FX-2000 or FleX-Net Series fire alarm control panels via an RS-485 data link
• Programmed to use the Ademco Contact ID and SIA-DCS reporting protocols
• Can be configured for DACT or UDACT mode of operation
• DACT mode transmits a common Alarm, Supervisory, Waterflow and Trouble information
• UDACT mode transmits point-specific Alarm, Supervisory, Waterflow, and Trouble information
• ZDACT feature allows for input circuits on the FX-2000 or FleX-Net panel to be grouped into software zones so that the UDACT-300A will report any individual event as a group event
• Reports either the circuit number or the combination of loop number and address when used with the FX-2000 or FleX-Net Series
• Event number offset for output circuit numbers provides the ability for each circuit on an FX-2000 or FleX-Net Series panel to have a unique circuit number transmitted to the monitoring station
• Override feature allows for the device type to be changed from the standard input type on the FX-2000 or FleX-Net Series panel to a pre-defined input type that is sent to the monitoring station
• UDACT-300A has the ability of disconnecting the incoming and outgoing calls and capturing the line for transmission to the Digital Alarm Communicator Receiver (DACR)
• Onsite or remote programming
• Onsite configurable with the on-board keypad and the CFG- 300 Configuration Tool or using the UIMA Programming Tool and a computer with an available serial or USB port
• Remotely configurable via a Personal Computer with a modem (Configuration is passcode protected)
• Provides telephone line monitoring and reports status via LED indication on-board
• Provides event logs of 500 entries each to save events from local dialer or remote fire alarm panel
• Logs can be reviewed locally with the CFG-300 Configuration Tool or remotely via modem
• Continuously supervises the status of each of two connected telephone lines at approximately one minute intervals
• Mounts in a dedicated location in the FA-1000, FX-2000 or FleX-Net Series main chassis