The Gamewell-FCI Velociti® Series, multi-mod ten input monitor module (MMI-10F) provides ten Style B (Class B) or five Style D (Class A) supervised initiating device circuits (IDCs) that are suitable for a wide range of monitoring applications. The Velociti Series use a communication protocol that substantially increases the speed of communication between the sensors and certain Gamewell-FCI analog addressable fire alarm controls. These devices operate in a grouped fashion. If one of the devices in the group has a status change, the panel’s microprocessor stops the group poll and concentrates on the single device. The net effect is response speed up to five times greater than earlier designs.

Specifications:

Features:

• Each MMI-10F monitor module provides ten (10), Style B (Class B) or five (5), Style D (Class A) individually addressable, individually programmable initiating device circuits.
• Ideal for applications requiring monitoring of normally open contact devices.
• Removable wiring terminal blocks allow ease of installation and servicing.
• Terminal blocks can accommodate 12 to 18 AWG wire.
• Flexible jumper configuration feature allowing one or two monitoring circuit addresses to be disabled.
• Individual LED indicators.*
• Ideal for retrofit applications.
• As many as sixty (60), initiating device circuits in one (1), 12” x 24” x 6.5” cabinet.
• Two (2), mounting cabinets available for two (2), (MBB-2 cabinet) to six (6), (MBB-6 cabinet) MMO-6RS.
• Bicolor LEDs flash green whenever the sensor is addressed, and light steady red on alarm.
• *Note: Only the red LED is operative in panels that do not operate in Velocity® mode.