Can be combined with our SUPER CLEANER
For all types of bicycles
Optimize detergent use
Allows product dilution
Forms an active foam

INSTRUCTIONS FOR USE
1. Fill the container with the liquid up to 0.5 L.
2. Screw the top firmly onto the container.
3. Pump until you hear air escaping from the valve, always do this sooner
spray for maximum results. If the liquid
the maximum level indicated will be a greater number of strokes
necessary.
4. Spray the foam at a distance of 50/70 cm from the area to be treated.
treated. The foam nozzle requires no adjustment.
5. Always make sure to release the pressure through the safety valve
before unscrewing the head.
• The user must always request the machine's safety data sheet from the dealer
chemical composition, also taking into account the standards
regarding the disposal of any residual liquids.
• The use of substances that do not meet the standards in
force is dangerous and endangers the user.
• The manufacturer is released from all liability in the event of damage
improper use or interference with the product.
Maintenance advice
To obtain the best performance and long-lasting durability of the pump, follow these steps:
this advice:
1. After each use of the pump, release the pressure, empty the reservoir and clean it thoroughly (with activated carbon, for example).
for example) and rinse with clean water. Fill the container with clean water and run the pump until the container and
circuit are empty. ADVICE: To ensure optimal pump performance, rinse with clean water and
Do not leave the product in the circuit after use. This can clog the pores in the felt discs in the lance.
2. Do not leave the pump under pressure for extended periods of time.
3. Lubricate the nozzle, gaskets, and O-rings with Vaseline oil at least once a year. Replace them as needed.

Warnings
1. Our pressure pump with foam lance is designed to spray a soft foam from a liquid diluted in water; Its use is recommended
on all terrains and/or cleaning situations where it is necessary to fix the cleaning fluid on the dirt for as long as possible.
1.1. Best performance is obtained when the liquid already contains foaming agents, which allow for a firm fixation on the liquid.
The area to be cleaned achieves maximum cleaning effect with a significant reduction in product consumption.
1.2. The pump has plastic parts and seals that can be damaged by the use of certain chemicals. The fan nozzle
POM material may deteriorate in contact with acids, ammonium derivatives, and acid salts. You are therefore advised
to perform compatibility testing to verify that the product(s) will not harm its materials due to incompatibility
the pump has been made.
2. Always release the pressure using the safety valve before unscrewing the top.
3. Never leave the pump unattended when the container is under pressure.
4. For safety reasons, never open the pump while it is still under pressure.
5. Keep out of reach of children.
6. Use of the pump entails liability.
7. Never expose the pump to sunlight and ensure it is stored in a frost-free environment. The pump can be used
at temperatures between +5 and +35°C.
8. Do not leave the pump near heat sources (such as a radiator) as the material used to make the pump cannot withstand high temperatures.